How to set up a high lamp tension spring

Light of the tension spring is how to set up? High lamp manufacturer small make up to you, the main contents are as follows:

1. Disconnect the power supply, open the box machine, out of the box cover, remove the lid;

　　2. Use hex wrench to adjust each tension spring screw. Make the light reached the best effect when the down rod is running;

　　3. If the rod moment rod vibration phenomenon, clarify balance spring tension is too large, repeat the above operation;

　　4. Bring about 7 brake power, according to the controller or ▼ button, make the light running four to five times up and down 90 degrees, such as pole moment pole present flutter phenomenon, clarify not balance the spring tension, high lamp goes in straight condition.