How to set lamps

Lamps in how to set the

more and more domestic campus, the student to the night lighting requirements also more and more high, almost every university installed lights, so the campus street lighting and ordinary road lighting is not the same.

1. Campus street light background:

street light has become a night than necessary tools, both in the streets, or on campus; Through the observation of the lamps in the campus a few road design, the requirement of campus overall layout and the intensity of illumination, to minimize the energy consumption, in the case of a street lamp power must be, can only reduce the use amount of street lamp. Therefore, on the premise of meet minimum lighting power, by changing the height of the lamp to make the distance between the lamp to achieve the optimal is one solution to this problem, use of 5 - general 6 meters of small lights.

2. Lamps in opening time:

campus students basic won't go out at night after 12 o 'clock, so no longer needed after 12 lights, so opening time lamps in winter can be arranged at 5 p. m. to 11 o 'clock in the middle of the night, and the other season opening time can be arranged at 6 o 'clock in the afternoon to midnight. Lamps are close to the border of the road, and the lighting effects are the same. The light source is point light sources. In a single light source, is apart from the light intensity of the light source L points to C = f ( L) ； Under more light irradiation, a point of light intensity for each light source to that point and light intensity of algebra. Road width everywhere, every point on the road, the light intensity to at least C0.

3. Campus street lights maintenance optimization:

there are students, campus safety awareness is not strong, so more lamps need maintenance, often normally check once a month, found that the problem handled in time.