loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

How to perform anti-oxidation treatment on street light poles before leaving the factory?

Street light poles are often used for outdoor lighting. When exposed to bad weather for a long time, the surface is easily corroded, which leads to a decrease in the service life of street light poles and reduces safety. In order to improve the service life of street light poles and pedestrian safety, street light manufacturers The surface anti-oxidation treatment must be carried out before the street light pole leaves the factory, so what are the ways of anti-oxidation treatment?

1. Hot-dip galvanizing

It adopts internal and external hot-dip galvanizing anti-corrosion treatment, and the galvanized layer must be greater than or equal to μm to ensure that the pole will not rust every year.

2. Surface spray treatment

After hot-dip galvanizing, polishing and polishing, the street light pole is sprayed with polyester plastic powder. The thickness of the plastic layer is greater than or equal to μm to ensure the uniformity of the plastic layer, high adhesion, and UV protection. Generally, it will not fall off for ten years.

3. Powder electrostatic spraying

Electrostatic spraying uses the principle of high-voltage electrostatic corona electric field. The metal guide cup on the spray gun head is connected to the high-voltage negative pole, and the coated workpiece is grounded to form the positive pole, forming a strong electrostatic field between the spray gun and the workpiece.

When the carrier gas (compressed air) transports the powder coating from the powder supply tank to the guide cup of the spray gun through the powder pipe, the guide cup is connected to the high voltage negative electrode to generate corona discharge, and dense electric charges are generated around it. The powder is negatively charged. Under the action of electrostatic force and compressed air, the powder is uniformly adsorbed on the workpiece. After heating, the powder melts and solidifies into a uniform, flat and smooth coating film.

Fourth, high temperature plastic spraying

This is a new surface treatment technology developed in recent years. It is mainly used to improve the surface performance of metal parts, improve the wear resistance, corrosion resistance of special media, oxidation resistance, electrical insulation and other characteristics of Effective surface decoration. The basic principle is to spray nylon onto the surface of the workpiece prepared in advance under the heating and melting of the flame to obtain the required spray coating.

The process of urbanization is accelerating, and the construction of outdoor road lighting is also in full swing. Street light poles are widely used in every corner of the city. It is extremely important for street light manufacturers to do the anti-oxidation treatment of street light poles. Our lighting is anti-corrosion The technical requirements are extremely strict and are well received by customers.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service