How to install the solar street light controller?

Solar street lights use solar panels to convert solar radiation into electrical energy during the day, and then store the electrical energy in batteries through an intelligent controller. When night comes, the intensity of sunlight gradually decreases. When the intelligent controller detects that the illuminance decreases to a certain value, it controls the battery to supply power to the light source load, so that the light source will automatically turn on when it is dark. The intelligent controller protects the battery from charging and over-discharging and controls the turn-on and lighting time of the light source. So how to install the solar street light controller?

1. After the battery is connected, the indicator light of the controller is in the state of running water. (The positive and negative poles are reversed, the controller does not work)

2. After connecting the load, press the 'Adjust' button three times continuously to adjust the time and the load will light up. (The load is not short-circuited, otherwise, the controller will be damaged)

3. The load is not bright, please check the load, or measure the battery voltage.

4. After connecting the photocell, the load is off, indicating that the light control is normal, otherwise, please check the photocell.

Quiz Phase:

(1) If everything is normal, the green light is always on.

(2) If the battery is under voltage, the red light is always on.

(3) If the photocell has no voltage, the yellow light is always on.

Note: Generally, the solar street light controller will be equipped with a wiring diagram. For the detailed wiring method, follow the diagrams marked on the controller. Otherwise, the solar street light controller will not work or be abnormal.

The above method of installing a solar street light controller is shared here. The contribution of solar street lights to street lights is huge. It will not suddenly go out during use. When there is solar energy, it will be charged through the battery panel and the battery, at night, the battery is discharging the light source through the controller, and the system uses a DC power supply. The life of LED lamps is very long, and the use process is kept at a low temperature to ensure high life.