How to install solar street light anchor cage1

The first step and the most important thing to install solar street lights is to build the foundation, just like building a house, no matter what you do, the foundation is always the most important. The foundation is used to fix the structure of solar lamps, and it also plays a role in placing and protecting the battery.　　Because of the height of various solar lamps and the magnitude of the wind, the strength of the foundation of various solar lamps is different. During construction, ensure that the foundation strength and structure meet the design requirements.　　 According to the situation of the construction site, the construction personnel are responsible for questioning the unreasonableness of the installation site and stopping the construction, and reporting the situation to the relevant person in charge as soon as possible. The rectification must be completed within a time limit and in accordance with actual construction standards. The installation steps of the anchor cage of the solar street light are as follows: 　　1. Strictly follow the size of the solar street light foundation plan (the construction personnel shall determine the construction size) to excavate the pit along the road; 　　2, in the foundation, the upper surface of the buried ground cage must be leveled ( Use a level to measure and detect), the anchor bolts in the ground cage must be perpendicular to the upper surface of the foundation (use a square for measurement and detection); 　　3. After the excavation of the pit is completed, leave it for 1 to 2 days to see if there is groundwater seepage . If there is groundwater seepage, stop the construction immediately; 　　4. Prepare the tools needed to make the foundation of the solar street light and select the construction personnel with construction experience before construction; 　　5. Select the appropriate cement strictly according to the foundation plan of the solar street light, and the place with high soil pH Special acid and alkali-resistant cement must be selected; there must be no impurities in the fine sand and stones that affect the strength of the concrete; 　　6, the soil around the foundation must be compacted; 　　7, the bottom of the tank where the battery compartment is placed in the foundation must be added with drainage holes or according to the requirements of the drawings . 8. Before construction, both ends of the threading pipe must be blocked to prevent foreign objects from entering or blocking during or after construction, which may cause difficulty in threading or unable to thread during installation; 　　 9. The solar street light foundation needs to be maintained for 5 to 7 days (according to Weather conditions are determined); 　10. Solar street lights can be installed only after the foundation experience of solar street lights is qualified.