How to install solar street lamps to best effect

In the process of the installation of solar street lights also covered a lot of technical knowledge, as long as people in accordance with the procedures to do it, can reflect the effect of play to the largest solar street lamps.

1, foundation pouring

when installing solar street lamp, be sure to make the position of the light pole. Survey and geological condition, on the ground 1 meter or so is soft soil, the depth of mining. And clearly excavation position involves the lower cables and pipelines, etc. There is no shade is street lamp at the top of the thing in the world, otherwise will replace the mining location.

2, embedded parts casting in but also establish the position of lamps and lanterns of 1 m 3 reserve pit, embedded parts casting. Embedded parts in the pit, PVC conduit a placed in the middle of the embedded parts, on the other side on the battery. Keep the embedded parts and foundation, the ground at the same level, but should also pay attention to the top of the screw and the original ground on the same horizontal plane. Basic parallel to one side and road; After this guarantee light pole stand straight. Then to C20 concrete pouring, the pouring of vibrators shuddered, ensure its dense and strong.

3, construction after treatment of

in the solar street light after the construction completion, clean up from time to time on positioning plate of the residue, clean and bolt with the various impurities, ensure that the future can be flexible to choose transfer, maintenance and repair. Moreover in the solidification process of concrete, must water curing of concrete in a timely manner. Waiting for concrete basic after solidification, which is about 72 hours before he can install droplight.

4, battery components installed

in the process of installing solar street lamps, also involves the installation of solar panels output is negative, the before connecting the controller must avoid nipple; Otherwise quality problems may occur. Moreover solar battery components and bracket connection must be extremely strong, safe and reliable; The output of the solar module line must avoid bare, at the time of installation to tighten, fastened; Battery components to the south. And the sun to good bearing.

to sum up, in the process of the installation of solar street lights, involves a lot of knowledge, but the main is safety, installation, in accordance with the procedures to do, so as to achieve the best effect of the installation.