How to effectively 'bath' photovoltaic power plant dust?

Photovoltaic power station is affected by dust, not only generating capacity, and the life of the photovoltaic power station. Although friends all know, dust wrong but for dusting it but there is a blind behavior, there are many matters needing attention in the process of dust

photovoltaic power plant visit by dust, dirt not only affect the power generation, also affect the service life of photovoltaic power plants. Despite all the friends all know that dust is not welcome, but there are some blind behavior in dust removal. There are many considerations for dust removal process. Follow the scientific dust removal is very important. First of all, pay attention to the time of photovoltaic power station photovoltaic power plants work under strong light conditions. Photovoltaic power station under the light with high voltage and high current. Any carelessness will bring security hidden danger to cleanup crews. When choosing a dust, therefore, should as far as possible to avoid the working time of photovoltaic power station, usually in the morning and evening, because of the photovoltaic power station during that time, work efficiency is low, small power loss. In addition, in the dust can be avoided during cleaning personnel to keep out the parts. Second, cleaning should be periodically. Compared with the southern humid weather, the haze of northern China obviously is much more serious, which leads to the dust on the home photovoltaic power station. Dust, however, not every day to waste too much time, to be performed every few months, seriously affected the power generation capacity. So what kind of cycle is appropriate? Usually, three times a month. If the spring snow or sandstorm, clean frequency will increase. Three, pay attention to clean the safety of photovoltaic power plants is made up of many components and support. When cleaning parts, should be careful not to scratch is the Angle. Placed on the outside of the DC cable connected to the component and the inverter. With the passage of time, the cable may be exposed. Therefore, should check the cable before cleaning, and clean after eliminate leakage hidden trouble. In addition, because most of the household photovoltaic system installed on the roof of the tilt, cleaning should pay more attention to staff when trample empty or the risk of slipping. Four, avoid direct flush during the winter, the photovoltaic modules should avoid direct water cleaning cleaning, because of the low temperature water components after cleaning the surface freezes, this may result in the crack of the component. In addition, in the process of water to clean, must also prevent water directly to wet junction box, leakage risk.