How to correctly use street lamp solar lamp cap

1, according to the lighting requirements, adjusted the device support, choose the most appropriate method of lamps and lanterns device. Then the interval of lamps and lanterns and power contact ready flat cable length. 2, opening the cover and in the history of lamps and lanterns of lamps and lanterns of the cable through the introduction of lamp lumen packed again, after connect the line for

1, according to the lighting requirements, adjust the equipment support, select the most appropriate method of lamps and lanterns. Then in the light and electric contact between the intervals for the same length of cable. 2. Open the lamp cover, the cable through the light, and install it in the lamp cavity. After good cable connection, you push hard on the cable, makes it easy to loose and fall off. 3. Install light pole, insert the lamp pole device support the introduction of holes, in accordance with the requirements of lighting installation, adjustment to the appropriate gear, tighten the screws, fixed. 4, how to change the light bulb, first remove the lamp holder, then unscrew the old bulb, and changing the new bulbs. Adjust to the appropriate gear according to the lamp wattage, and finally into the lamp cavity, tighten and fixed. How to realize the traffic light is the main process how to use the right lamp, also pay attention to the process of some equipment.