How to correctly choose solar photovoltaic power station photovoltaic stents?

Solar photovoltaic bracket, is to put in a photovoltaic system, solar panel installation, fixed design of special support. Understands for photovoltaic (pv) knows, for installation of photovoltaic system components, photovoltaic stents choice is

solar photovoltaic stents for placement, installation and fixation of solar photovoltaic power generation system of solar panels and the design of special support. Understands photovoltaic knows that the choice of photovoltaic stents is very important for the installation of photovoltaic system components, photovoltaic stents will not only cause because of the poor quality of some installation problem, sometimes encountered bad weather, such as typhoon blizzard, even lead to photovoltaic modules collapsed, causing economic losses, sometimes even affect people's life safety. First, pv support structure must be solid and reliable, able to withstand air erosion, wind load and other external influence. Installation should be safe and reliable, low cost, good using effect, almost free of maintenance, maintenance and reliability. Good support need to consider the following factors: ( 1) The strength of the material should be resistant to at least 30 years of climate factors. ( 2) In a snow storm or typhoon extreme weather will not be affected. ( 3) Scaffolds should have slot rail design, in order to put wires and to prevent electric shock. ( 4) Power equipment should be installed where no environmental exposure, convenient for regular maintenance. ( 5) Must be easy to install. ( 6) The cost should be reasonable. High quality support system must use computer simulation verify its design software in extreme weather conditions, and the mechanical properties of the strict test, such as tensile strength and yield strength, to ensure the durability of the product. Therefore, these factors must be considered when choosing stents.