How to correctly adjust the installation space solar street light

If we look closely, it's not hard to find, there is a distance between the solar street light. And the spacing between the two lamps or the same length. How to correctly adjust the installation of solar street lamps spacing, to make solar energy street light maximum

if we look closely, it's not hard to find, there is a distance between the solar street light. And the spacing between the two lamps or the same length. How to correctly adjust the installation of solar street lamps spacing, to make maximum use of the solar street lamps? In general, solar arrays sheath 2 * 2. 5mm2。 Light jacket for 2 * 1. 5 was, and determined the sheathed wire length. Solar energy battery components sheath line in connection with the solar cell component side should have enough allowance, must be the bottom flange at one end, and the light source sheath line has enough margin on the connection end and light source, the other end must be long and the bottom of the flange. The height of the solar street light pole usually determined based on the road width. The road width of the new rural construction is in commonly 5 meters, the height of the rod can be in 4 - 6 meters, light source in 20 - in the scope of power Between 40 tile. The scope of solar street lamps should not be less than 15 meters. If is the two-way lanes wide, general width of more than 10 meters, LED street lamp, can use the height of 8 m light pole, the light source of about 40 watts: the installation of solar street 8 m distance from the lamp, 8 meters of solar street lamps installed in the way of new rural. In fact, it is still quite a few, most customers will choose to install 5 - 7 meters of solar street light, the installation distance of about 10 - 15. 2:7 meters of solar energy street lamp installation space, generally choose 6 - 7 meters of solar street lamp, when the road is 7 meters wide, install 7 meters of solar street lamps, general spacing should be kept in the 20 - 25 meters, especially install solar street lamp at the corner, so that it would not affect the part of the lighting. 3:12 meters to install solar street lamps spacing, pole must be hot dip galvanized inside and outside, it will be more safe. For this kind of installation space, it is suggested that 12 meters of solar street lamps spacing for 30 - 50 meters, width is more than 15 meters. The higher the pole, the choice of light source, the better, the configuration should be slightly higher. Above is the solar street lamp, to share the spacing problem about installing solar street lamps, hope that through the above content, help to those in need.