How to choose the distance between the installation spacing of solar street lights

With the rapid development of society and the deepening of poverty alleviation projects, more and more rural roads and urban communities have installed solar street lights. However, there are some obvious problems with solar street lights in some places. For example, some solar street lights are not very bright, some become dark, or two street lights are installed too close, and the lighting area overlaps, etc. This is caused by unprofessional installation of solar street lights.　　 So the installation of solar street lights is also a very important link, and the most important part of the installation is the installation spacing of solar street lights. There are many factors that affect the installation distance. The product parameters of LED solar street lights play the most important determinant. Secondly, it will also be affected by other factors such as road conditions. In summary, the installation spacing of solar street lights mainly revolves around the following two points: 　　 1. The lighting method is divided into: single-sided lighting, cross lighting on both sides, symmetrical lighting on both sides, like crossroads and bends For special roads, lights can be arranged according to actual conditions.　　Second, the height of the poles 　　The installation spacing of solar street lights with poles of 5-7 meters 　　Scenic areas and parks generally prefer streetlights with a height of about 5-7 meters, especially the new rural construction road with a width of about 6 meters. In the night environment, there is not much pedestrian and vehicle traffic on rural roads, so one-sided cross-lighting is generally used for installation, ensuring that the installation distance is about 20-25 meters, and more than 25 meters will affect part of the lighting. In addition, one more street light should be installed at the corner to avoid blind spots. The installation distance of solar street lights with a pole of 8 meters. If you want to install a street lamp with a pole height of 8 meters, you must ensure that the distance between the street lights is 25-30 meters, and you should use cross-lighting on both sides for installation. The method is mostly used when the width of road lighting is required to be 10-15 meters.　　The installation spacing of solar street lights with 12 meters of poles　　Want to install 12 meters of poles on the road, the longitudinal spacing of solar street lights is generally recommended to be 30-50 meters, the two-sided symmetrical lighting method should be used, and the road lighting width exceeds 15 meters. As long as the illumination value is reached according to the requirements, and there is no hard requirement, the 60-watt split solar street light is a good choice.　　 Install in accordance with the above requirements, which can greatly ensure the demand for road lighting without causing waste of resources. If the solar street lights are installed close to each other, it is unreasonable, which is likely to cause waste of resources, and the investment cost is relatively large. But solar lighting and electrical has been engaged in the solar street light industry for 15 years. What we can guarantee is that no matter what kind of solar street light, no matter what configuration, we can give the best installation plan. Therefore, choosing solar lighting will let you Worry about! Consultation hotline 13905247821