How to arrange LED street lights more reasonably in urban construction

In order to make the city's lighting more standardized, rationally integrate the urban street lamp design into the beautiful city, and achieve the icing on the cake, the three-dimensional position of the street lamp, lighting control and light source selection must be arranged first, and the urban LED street lamp lighting design should be discussed and arranged. 1. Arrangement of lamps and lanterns: There are four types of designs for the arrangement and arrangement of road lighting lamps in the community, single-sided lighting, central lighting, central interlaced lighting, and symmetrical lighting. Generally, double-sided lights are used on main roads. There are two ways to arrange the lights on both sides: one is symmetrical arrangement. The advantage of symmetrical arrangement is that it is more beautiful, but the disadvantage is that the illumination is not uniform enough and suitable for wider roads; the other is that the staggered arrangement is not as good as aesthetics. The symmetrical layout is beautiful, but the illuminance is relatively uniform. The two layout methods have their own advantages and disadvantages. Considering that road lighting in residential quarters generally meets the requirements of functionality, more attention should be paid to aesthetics, so you can choose symmetrical layout and some beautiful-looking courtyard lights to achieve the best visual effect. You can choose high-lights for courtyard lights. At 3-4 meters, remember that the power of a single light source should not be too large, and the lamps should not be installed near the windows on the first floor of residential buildings to avoid affecting residents' rest. Larger venues such as squares and parking lots in the small area can choose courtyard lights, and also can choose flying butterfly, spherical, and contour pole lights, but the height of the lights and the illumination angle of the light source must be limited to avoid light pollution and light The light rate is inconsistent when hitting the ground. 2. Choose the type of light source The main types of light sources currently used in street lighting are: compact fluorescent lamps, metal halide lamps, and high-pressure sodium lamps. Among them, high-pressure sodium lamps have the advantages of energy saving, high luminous efficiency, and moderate color temperature, and they are widely used in street lamps. For roads with a road width of more than 8m, it should be considered that the use of semi-cut or light-cut functional street lights. General roads and branch roads use compact fluorescent lamps, the average illuminance should be lower than that of the main road, generally controlled at 0.5-3LX, which can make the whole community rich in layering, and at the same time can provide a softer outdoor for low-rise housing users surroundings. The above information is provided by the editor of solar lamp factory lighting.