How to apply solar controller

The use of solar energy controller method: use the M4 screw fixation support controller or smooth appearance, after the bridging lamp ( Pay attention to the polarity of the main light) Joint cohesion, with insulation tape package, check the battery voltage. First, it should be the correct voltage control

solar controller method of use: use the M4 screws to fix support controller or flat and firm, connection after good lamp ( Note the polarity of the main lights) Joint, wrapped with insulating tape, check the battery voltage. First of all, it should be the correct voltage controller. If the voltage range is different, it will stop working. When the battery voltage is less than 10. 7 v, please recharge. For example, some connect battery and digital tube ( Note the polarity of the battery) 。 If it is bright, this means that the battery connection are correct. If not, please open the polarity connection cable and damage to the battery. Uninterruptible power supply connection, the use of insulating tape. The first thing to check is voltage. Its voltage regulator should be suitable for solar panels. If the voltage range is different, it will stop working. As shown in solar panels, the controller of the panel will light up 'the' lights. If not, please check the polarity of the solar panels. Work this control system has two kinds of forms: for lighting control, 'P for normal control mode, advocate the lamp work time is set to 15 hours, 1 hour a short press' set 'button is equal to 1 hour, led digital tube display the symbol meaning of lighting control mode or less, advocate the lamp to start working after sunset and sunrise or edit cut off timer.