How much money increase lamp lights what are the ways of life

The reliability of the LED lighting lamps and lanterns, Life) Depends largely on the heat dissipation, so improve the level of heat dissipation is one of the key technologies. Mainly to solve the excess heat generated by the chip through the heat sink, heat dissipation body out, this is a very complex technical problems. Below we



the reliability of the LED lighting lamps and lanterns, Life) Depends largely on the heat dissipation, so improve the level of heat dissipation is one of the key technologies. Mainly to solve the excess heat generated by the chip through the heat sink, heat dissipation body out, this is a very complex technical problems.

the following accounts respectively with us:

the power of the LED lamps and lanterns, which LED to consider heat dissipation, power LED need to heat dissipation. The power LED is refers to the working current is more than 100 ma of light-emitting diodes. Is the line of the ASSIST union, defined by reference to the United States, according to the existing two LED the forward voltage of typical value 2. V 1 and 3. 3 v, i. e. , the input power is more than 210 mw and 330 mw of leds are power LED, all need to consider the device heat dispersion problem, some people may have different views, but practice has proved, to improve the reliability of power LED ( Life) Consider the power LED heat dissipation problem.

heat related parameters related to the LED heat dissipation of the main parameters such as thermal resistance, moderate temperature.

thermal resistance is refers to the effective temperature of the device and the external regulation reference point temperature difference divided by the number of devices in the steady state power dissipation of the quotient. It is said the device cooling degree of the most important parameters. The heat dissipation good power LED thermal resistance & le; 10 ℃ / W, domestic reports the best thermal resistance & le; 5 ℃ / W, foreign can reach thermal resistance & le; 3 ℃ / W, such as do the level to ensure the service life of power LED.

refers to the LED junction temperature device for heating the main part of the semiconductor junction temperature. It is the LED device under the working conditions, the ability to withstand temperature value. Therefore the SSL plans to improve heat resistance target. Chip and heat resistance of phosphor is very high, the current has reached chip junction temperature high lamp light pole under 150 ℃, the phosphor powder under 130 ℃, the basic life won't have any influence on the device. Chip phosphor higher heat resistance, the requirement of heat dissipation is low.

there are several different temperature rise of temperature, we discussed here is: shell - The environment temperature. It refers to the LED device shell ( LED lamps and lanterns can detect the most hot) The temperature and the environment ( In the light of lamps and lanterns in the plane, is apart from the lamps and lanterns is 0. 5 metres) The difference of the temperature. It is a temperature can be measured directly, and can directly reflect the LED device peripheral cooling degree, practice has proved that in the ambient temperature of 30 ℃, if measured LED tube shell for 60 ℃, the temperature rise shall be the 30 ℃, this basically ensures the service life of LED device value, such as temperature rise too high, LED light source, maintain rate will decrease greatly.

LED lamps and lanterns, heat dissipation new problems:

with the development of LED lighting products, there are two new techniques: first, in order to increase the flux of the single pipe, into the larger current density, such as mentioned below, so that the chip produce more heat, need to heat dissipation. Secondly, encapsulate the new structure, with the increase of the LED light source power, need more power LED chip set packaging together, such as lamps and lanterns of COB structure, modular, will produce more heat, the need for more effective heat dissipation structure and measures, which in turn to put forward new task heat dissipation, otherwise it will greatly affect the performance and life of LED lamps and lanterns.

and the LED lamps and lanterns, heat dissipation total effectiveness 50%, there are a lot of energy to become hot. Second, the LED large current density and modular lamps and lanterns will produce more concentrated waste heat, need a good heat dissipation.

to raise the level of heat dissipation we offer the following Suggestions: