How many watts appropriate home solar lamp

1. Each part of the fixed component fixed solar panels solar street lamps, solar panels, lamp holder fixed pick arm, then picked up a support arm and fixed main rod, cable inserted into the control box and battery box; 2. Lifting lever pay attention to safety, screw fastening absolute good, group



1. Each part of the fixed component fixed solar panels solar street lamps, solar panels, 【 Solar panels, 太阳能板) Is by absorbing sunlight, the solar radiation through the photoelectric effect or photochemical effect directly or indirectly converted into electrical energy device, the main material of most of the solar panel as the 'silicon', but because of the production cost is larger, so it widely used, we still have some limitations. 】 , lamp holder fixed arm, then picked up a support arm and fixed main rod, cable inserted into the control box and battery box;

2。 Lifting lever pay attention to safety, screw fastening absolute good, component error point of view, such as: toward the sun Angle, eventually need to adjust their south direction;

3。 Before lifting lever to check whether the fasteners is a powerful components, installation of lamps and lanterns is correct, whether it's normal work. Simple debugging system normal release the solar panels on the control cable; Cable connected to the solar panels, controller on careful observation index change at the same time, all belong to normal before the lifting installation;

4。 Battery into the battery compartment according to with the cable connected to the controller, technical requirements for the battery to withstand the load, and then take the solar panels, must pay attention to when connected to the controller in each terminal superscript should not wrong, collision, the positive and negative poles should not take the wrong connection, otherwise the controller will be damaged.

5。 Normal debugging system, release control cables, cable connected to the solar panels, controller and careful observation index changes, close the control box, to test fully, so as to avoid other problems.