How in the new rural install solar street lamps and other lamps and lanterns of Chinese - — In the

Lights in the high-end atmosphere, grade, is a traditional Chinese style cultural significance in the current era background of interpretation; Is the lamps and lanterns of ancient and modern culture to fully mix design for China, through the understanding of traditional culture, modern elements and traditional elements together, is

China lamps and lanterns of high-end atmosphere and high grade is a traditional Chinese style in interpretation of the meaning of culture against the background of The Times. This is a fully combine the Chinese design of lamps and lanterns of ancient and modern culture. Through the understanding of traditional culture, combining modern elements and traditional elements, and according to the modern people's aesthetic demand to explain with traditional styles of things. The installation of lamps and lanterns, therefore, China also should have certain specifications and requirements. First of all, the design of China lamps and lanterns should be in harmony with the surrounding environment, emphasis on elegance, complement each other. Second, the light of the surrounding geographical environment of choice. Chinese empty sky of lamps and lanterns should no impact the high tension line installation and trees; There is no drain installation site of underground pipe and cable ducts; At the same time, pay attention to the installation site drainage unblocked, prevent water; Three, foundation construction, and advance. After determine the installation position, dig a hole, the pouring of the buried section. It can use finished casting or casting at the scene. In situ concrete independent foundation, pouring and vibrating. End of the casting, the anchor bolt embedded parts should be buried, anchor bolt should be thoroughly grouting for the second time. Light pole should be paid attention to at the same time, on the basis of the bolt protective measures to prevent damage of bolt. When pouring, embedded threading tube ( Protecting tube) Should be placed at the same time. Shall appoint the timely aim the basic outlet hole and battery outlet hole. On the port should be located in the middle of the embedded parts, and higher than that of concrete embedded parts 5 cm ( In case of water) 。 Embed threading pipe bending should avoid as far as possible. The inside diameter shall not be less than 1 wire hose diameter. 5 times. Protecting tube bending, should not be less than 2 times, and try to avoid death. Keep the port slightly downward sloping. Nozzle must be plugged to prevent mud and other debris into the tube, threading pipe clogging. After completion of pouring, embedded parts for level adjustment, make concrete foundation surface is flat and level. Prefabricated foundation embedded parts before the installation, should from the two directions for vertical degree. The installation process, should monitor verticality. Verticality deviation shall not be more than 5 mm, to ensure the verticality of lamp. The site production must remain the basis of the five days ( According to the construction period of the environment temperature, controlled by the construction personnel) 。 In the process of maintenance, on the basis of surface should be level test on a regular basis, to ensure its level. Do not conform to the requirements, should be timely repair. Based embedded parts in production, also should be attention to the construction of lightning protection grounding. Grounding resistance should be according to the installation location of the geological conditions of reasonable design. Four, China lamp assembly in the assembly of the lamp before, should check the quality and quantity of each part, and deal with the problems found in advance. Recommended installation steps are as follows: first, the assembly palanquin. Install bent arm and chimney. Install the top. Then the whole assembly lamps and lanterns, slide to the bottom first base, be careful not to friction light pole, and then put it in the middle bracket ( Manufacturers are also called stents) , then install the sedan chair, the installation source, the connection line light source, the lamp line to tightly posted on the walls of the sedan chair, don't spread caused by the shadow. 5. Set up China's lamp. When assembled China lamps and lanterns, check the assembly quality, and lit the lamp. Only after the test there is no problem, can install the lamp. Vertical axis vertical installation requirement light pole is perpendicular to the road. Light pole should be set on the longitudinal axis parallel to the road line.