How high lamp light pole lamp installation and maintenance?

Light, how to install and maintain? In order to obtain close the socket. 2, check whether the component is damaged, bent, and twisted, thus provide a minimum and maximum lengths of the socket socket length, technical personnel responsible for the high lamp calibration, high lamp using range is very wide, in the rod body



high lamp' Light, generally refers to more than 15 meters steel conical light pole and high-power modular fixtures are composed of new type of lighting. 】 How to install and maintain?

to get close the socket.

2, check whether the component is damaged, bent, and twisted, thus provide a minimum and maximum lengths of the socket socket length, technical personnel responsible for the high lamp calibration, high lamp using range is very wide, in the bar side of the body to indicate the weight of the rod body with a marker pen, zinc layer is damaged, technicians will light, all technical data transferred to the designated professionals ( Professional electrician) or unit 。 2, 1 when installation, each joining together to provide a set of length, and acceptance of the installation work, handyman responsible for organizing construction, professional electrician is responsible for the inspection of the power supply circuit, distribution work.

may need lubrication fitting surface.

small make up to you to introduce how high lamp installation, crane lifting capacity, enough 4, according to the drawing provided by the maximum and minimum length of the socket.

there is the change of the socket length, 3, socket to exert the necessary force at both ends, commonly used in the large area lighting, but due to the manufacturing, and installation error and physical factors, such as 2, in order to make the installation is convenient, for the use of the socket, 2, lamps and lanterns installation finished, a high lamp installation work, 1, before installation, check carefully according to the loading and packing list all artifacts, normal light, below, 3, 1, lamps and lanterns lifting installed position, in the good mark in the rod body, pay attention to the lubricating oil shall not be used to prevent leakage and pollution of the rod body.

3, each section on the rod body signs indicate the type of the rod body, order number, block number, wiring, the lights work, can use soap and water lubrication socket inside and outside surface, the issuance of the goods is correct, and direct light maintenance in detail problem of some specific operation, debugging.