Household lamps and lanterns use and maintenance of the complete

How to safely use the lamps and lanterns, and prolong the service life of lamps and lanterns? Experts offer the following advice

first, buy back after the lamps and lanterns, don't busy installation, should look at the tag of lamps and lanterns and read the installation instructions, and according to the instruction of installation and use of lamps and lanterns, otherwise there may be dangerous.

second, according to the sign to provide light source parameters in a timely manner to replace aging tubes, found on both ends of the lamp is red, black or dark, jump arranged not bright, should be timely replacement bulbs, prevent unsafe phenomenon such as ballast burn out.

the third, when the clean maintenance should pay attention to don't change the structure of the lamps and lanterns, also don't replace the parts of lamps and lanterns, at the end of the cleaning maintenance, should install lamps and lanterns is good according to the sample, don't packing, wrong parts of lamps and lanterns.

4, lamps and lanterns in use but also to strengthen the maintenance and to prolong its service life. Specific attention should be paid to the following room of tubes should often use dry cloth to wipe, and pay attention to prevent moisture intrusion, lest time grew, the phenomenon of the corrosion damage or leakage short circuit; Lamp shall be installed in the toilet, bathroom equipped with moistureproof lamp shade, otherwise it will greatly reduce the service life; In the lamp of the kitchen should pay special attention to prevent lampblack, because oil accumulation will affect the light illumination; Light transmittance of light color lampshade is good, but easy to stick ash, clean them diligently, so as not to affect the light penetration degree; If the lamps and lanterns of nonmetal, can use wet cloth to wipe, in order to avoid dust accumulation, interfere with the lighting effect.

experts also remind when using lamps do not frequently switch as far as possible, because the lamps and lanterns at the instant of the frequent start, through the filament current is greater than the normal work of electric current, the filament temperature rise sharply accelerated sublimation, which will greatly reduce its service life, so try to minimize the switch of lamps and lanterns.

China lighting network pony

soufun