High-power LED shockproof flood light NFC9122 mechanical equipment lighting good lamps

High-power LED shock-proof flood light NFC mechanical equipment lighting good lamps and lanterns, NFC LED shock-proof flood light, using imported light source, using DC power drive, no flicker, ordinary lights are AC driven, it will inevitably produce stroboscopic Eyes are bad for a long time. The heat is small, 90% of the electric energy is converted into visible light, only 20% of the electric energy of ordinary incandescent lamps is converted into visible light, and the other 80% of the electric energy is converted into heat, which is a great waste of limited resources. High-efficiency and energy-saving Under the same brightness, LED energy-saving lamps consume only 1 kWh per hour, ordinary incandescent lamps consume 1 kWh per hour, and ordinary energy-saving lamps consume 1 kWh per 100 hours. The safety factor is high, the required voltage and current are small, the heat is low, and there is no safety hazard. It can be used in dangerous places such as mines. The heat is small, 90% of the electric energy is converted into visible light, only 20% of the electric energy of ordinary incandescent lamps is converted into visible light, and the other 80% of the electric energy is converted into heat, which is a great waste of limited resources. Rated power: W Dimensions: **Power supply AC-V life hours, light source life hours, luminous decay less than %, service life> annual light efficiency ≥ Lm/W lamp efficiency>% color rendering index-protection level IP color warm white-K, Positive White-K