High lamp manufacturers seiko watches how to adjust the time date high

Think sea ray lighting, light, because the height is very high, a lot of light, often up to 30 meters high above, in some places use light, even can reach the height of 40 meters. In this case, if you don't use some measures to control the rise and fall of high lamp,



think sea ray lighting, light, 【 Light, generally refers to more than 15 meters steel conical light pole and high-power modular fixtures are composed of new type of lighting. 】 Because the height is very high, a lot of light, often more than 30 meters, use light, even in some places can reach the height of 40 meters.

in this case, if you don't use some measures to control the rise and fall of light, so if the maintenance of normal or aftermarket high lamp, is a very headache thing.

in general, the height of the light, in 15 meters need to install the lifting system, so in the later of various operations, is more convenient, if light, there have been some problems are also available, without such a headache.

the following sea ray lighting will introduce about the rise and fall of high lamp principle.

for light lifting system, down to the bottom of the light pole on the inside, you need to install the system circuit of control system and elevating system. The whole lamp control system into the inside can avoid the sun and other outdoor environment interference, can greatly improve the service life of the light.

light, will be able to lift the main principle is free, it is with the motor, worm gear and worm reducer, safety coupling, main cable, vice wire rope, the rope, and movable pulley group interaction components such as interaction to form a light, lamp holder of random landing on the high.

worm gear and worm reducer of slide and static control class. The pulley is the main function of the operating light, lamp holder part of the lift, make up and down at a slower speed, better able to control the lamp panel stable performance.

the main wire rope with the rope and the lamp holder parts vice wire rope connected, it can prevent the occurrence of pair of wire rope regular headache problem.

sea ray lighting for the whole block and tackle usually very high quality requirements, both hardness and corrosion resistance, make sure the stability of its performance, to ensure that the lamp holder of high lamp under normal circumstances the lifting operation.

lamp holder part has 6 group guide pulley block and 3 above brake tools, lifting in light, lamp holder with 120 - degree distribution along the surface of the light pole guide wheel rolling, in order to prompt lamp holder when lifting and stable operation.

light guide pulley of lamp holder and lamp body contact surface USES the rubber material.