High lamp maintenance content

Light, what are the main content of daily maintenance, follow the below to learn about the high lamp manufacturer.

1, check the mast lighting all the black metal artifacts ( Including light pole wall) Hot dip galvanized anti-corrosion, locking measures is in accordance with the requirements of the fastener Coating quality should comply with the GB/T9790 GBJ36011 and the relevant provisions of the GB/T11373) 。

2, solar street lamp factory inspection is high lighting verticality ( Must be conducted according to the requirements in accordance with the provisions, regular use theodolite measuring and testing) , bar is a bit of permissible error should be less than bar high 3 & permil; , light pole axis straightness error shall not be greater than the rod long 2 & permil; 。

3, check whether there is the outer surface of the light pole and weld corrosion situation, to experience a long standing but cannot to change again, if necessary by ultrasonic, magnetic particle inspection such as inspection method to test the weld and test.

4, check the light plate mechanical strength, ensure the safety of the lamp panel, for enclosed lamp panel should check the cooling condition of it.

5, check the bracket of lamps and lanterns of fastening bolts, reasonably adjust the lamps and lanterns of projection direction.

6, carefully check the light dish wire ( Soft rope or cord) Usage, see whether or not the wires are excessive mechanical stress, whether there is aging, cracked, line, etc. , in the event of unsafe phenomenon should be dealt with immediately.

7, the damage of light source components for replacement and repair of electrical appliances, etc.