When spring comes, can summer be far behind? The weather in summer is hot and rainy, although all kinds of street lamp systems are subject to strict quality inspections. However, as time goes by, many unexpected situations will occur. As the temperature rises and the climate changes, the failure rate of public facilities such as solar street lights and LED street lights also increases. So the following is a solar street light factory lighting factory to explain to you the problems that solar street lights often occur in summer and what are the countermeasures: 1. Because most areas of China have a subtropical monsoon climate, they are often exposed to typhoons in summer. Such as the attack of strong winds, strong winds have brought great challenges to these high-altitude but relatively weak-based street lights. Therefore, solar street lights often have solar panels and lamps falling, light poles tilted, and dumped. When the phenomenon occurs, it will not only fail to carry out normal lighting work, but will also bring a great safety hazard to pedestrians and vehicles on the road. Therefore, we must check the safety performance of solar street lights and LED street lights before the strong wind strikes and eliminate hidden dangers in advance maintenance work. Go to the site to check the condition of the solar street lights to see if the battery panels and lamps are shaking, whether the street lights are tilted, whether the foundation cage bolts are firm, and whether there is any looseness. If there are any of the above situations, they should be eliminated in time to avoid other situations. 2. As the temperature rises sharply, the energy storage of the battery is also affected. We should check the previous battery in time, and replace the solar battery whose capacity cannot meet the requirements in time to avoid affecting normal operation. 3. Check the waterproof performance of the system. Open the door at the bottom of the solar street light, take out the controller of the solar street light, and check whether there is poor contact, water seepage, tape falling off, etc. at various joints. If there are any of the above phenomena, corresponding rectifications should be made in time to eliminate the hidden dangers as soon as possible. Because the amount of rain in summer is very large, the rainwater generally does not enter the light pole, but the condensation of water vapor will also cause a short circuit. In addition, there are continuous rainstorms in the summer, and the depth of the water often appears unseen in many years. In special circumstances, it is necessary to prevent problems before they happen. The above is provided by the solar lamp factory lighting. For more questions, please click on the right picture to consult online customer service.