Preface
this standard is not equivalent with the international electrotechnical commission IEC60969:2000 'since the ordinary lighting ballast fluorescent lamp performance requirements', and combined with the domestic variety, such specific conditions such as quality level, and for some products after experimental verification.
is this standard of GB/T 17263 - 1998 'general lighting from ballast fluorescent lamp performance requirements'.
this standard and GB/T 17263 - 1998 compared to the main differences are as follows:
- — On the product type classification is cancelled 2 g, 4 g, 6 g, into the double tube, four pipe and tube, and increases the helical structure;
— — Change the lamp power and luminous flux and one-to-one correspondence relationship to within a certain range of power requirements of the lighting effect of the, luminous flux by the manufacturer or seller nominal, and the lower limit of power requirements;
— — Improve the performance of light color of general color rendering index and chromaticity tolerance requirements, and 2000 h light to maintain the rate and the life of the requirements;
— — Maximum power factor to cancel requirements;
— — According to IEC 61000 - to the requirement of harmonic current limits 3 - 2 requirements for the rules.
from the date of implementation of this standard, instead of GB/T 17263 - at the same time 1998.
this standard put forward by China light industry federation.
this standard by the national lighting appliances standardization technical committee points technical committee under centralized electric light source and its accessories.
this standard drafting unit: zhejiang sunshine group co. , LTD. , philips yaming lighting co. , LTD. , osram foshan lighting co. , LTD, panasonic lighting light source co. , LTD. , huaxing electric light source photoelectric industrial co. , LTD. , Beijing research institute, east China electronics group.
main drafter of this standard: HangJun, Chen Senjie, Huang Pei, Dong Jianming, Yang Long, Cheng Taisong, Yao Nian collection, zhang Ming, QuSuHui, moral ning, Yang.
this standard revision for the first time. 1
the scope of this standard specifies the general lighting since the ballast of fluorescent lamp performance requirements, test methods, inspection rule and marks, packaging, transportation, storage, etc.
this standard applies to the rated voltage of 220 v, 50 hz, rated power is below 60 w of using screw type lamp holder or a bayonet lamp holder, and similar situations in the family of ordinary lighting, the integrated control starting and stable ignition components of ordinary lighting ballast fluorescent lamp. For details, please click on the download: GBT - 17263 2002 ordinary lighting ballast fluorescent lamp performance requirements. rar