Family outdoor solar yard lamp

1, the setting of traffic signs should be comprehensive consideration, rational layout, prevent information is insufficient or overload phenomenon. Information should be connected, important information should be repeated. 2, traffic signs usually should be set in the road on the right side direction or roadway above; Also



1, the setting of traffic signs should be comprehensive consideration, rational layout, prevent information is insufficient or overload phenomenon. Information should be connected, important information should be repeated.

2, traffic signs usually should be set in the road on the right side direction or roadway 【 Roadway or driveway. 】 Above; Also can be set according to the specific situation in the left, or around on both sides to set at the same time.

3, visibility to ensure that the same place you need to set up more than two logo, can be installed in a support structure ( Support) , but should not be more than four (4); Separate set of logo, should satisfy the ban, instructions and setting up the warning signs of space.

4, in principle, to avoid the different kinds of signs and set. Lifting speed limit signs, lifting the ban on overtaking marks and intersection priority passing each other, leading marks, parking to give way sign, slow down to give way' Slow down to give way sign, said cars should slow down to give way. 】 Should be set separately; Such as restricted conditions cannot be set individually, a support structure ( Support) Should not be more than two. Identification plate on a support structure ( Support) And set up, according to the order of the ban, instructions, warnings, and, after the first left after the right arrangement first.

5, warning signs should not be set. The same place you need to set up two or more warning signs, in principle, only set one most in need. ( Warning: warning vehicles, pedestrians pay attention to the road in front of)