loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

Factors that affect the service life of the LED lamp holder

Factors that affect the service life of the LED lamp holder

1, the transient flow affect the service life of the LED lamp holder:

the transient flow of things is beyond the current through the high power LED lamps and lanterns of high power LED lamps and lanterns of maximum rated current technical data sheet, this may be due to the large current directly produce may also be produced by high voltage indirectly, such as transient lightning, switching power supply of the transient switching noise, power grid such as over-voltage provoked flow. These things are transient, short duration, we usually call it rush, such as 'current peak', the 'voltage peak'. Form the status of the transient flow of things include high power LED lamps and lanterns, turning on the power supply or charged plug of the transient current. High power LED lamps and lanterns of maximum hit after the failure modes are not fixed, but usually causes welding line is damaged, the damage usually consist of a great instantaneous over-current provoked. In addition to incur welding wire burning out, also can cause other local damage near the weld line.

2, electrostatic discharge, affect the service life of the LED lamp holder:

electrostatic discharge ( ESD) Damage is the high level of integration semiconductor device manufacturing, transport, and application of one of the most common transient overvoltage hazard, and high power LED lamps and lanterns lighting system must meet IEC61000 - 4 - 2 specification 'human body electrostatic discharge form' 8 kv contact discharge, in order to avoid system in electrostatic discharge can cause the maximum impact of the failure. LEDPN junction array performance will be reduced or damage. ESD things discharge circuit chip internal failure cause of the high power LED lamps and lanterns, this failure may be only partially function damage, serious word will incur high power LED lamps and lanterns for the damage. About nearly 80% heat energy is converted to the high power LED lamps and lanterns lighting design, thermal management and fault maintenance overheat is its face a battle. Theory and the theory has proved that the performance and life of the high power LED lamps and lanterns is working with high power LED lamps and lanterns of PN junction temperature closely related. When high power LED lamps and lanterns chip junction temperature 10 ℃, high luminous flux is 1% attenuation, high power LED lamps and lanterns, life will be reduced by 50%.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service