Energy saving analysis of intelligent lighting system

Intelligent lighting control system widely used in construction field, regardless of the indoor, outdoor, size is not applied. The system is east office buildings, hotels, entertainment places, business people, sports venues, apartment, villa, courtyard attractions such as the ideal lighting control equipment.

 随着EIB系统在中国市场的进一步的推广，ABB i- 公共汽车? EIB system will be more and more shows its unique advantage, give the user a variety of functions, and leading position in the development of intelligent building technology. Why, can be analysis from its energy.

集中管理，减少人为浪费

现代高层办公大楼中，人为造成照明能源浪费的现象仍然非常严重，无论房间有人还是无人，经常是“长明灯”。 Intelligent lighting system to distributed control and concentrated management, in the central control room of the building, management by operating the keyboard can be closed no room lighting.

自动调光，充分利用自然光

智能照明系统中的光线感应开关通过测定工作面的照度，与设定值比较，来控制照明开关，这样可以最大限度地利用自然光，达到节能的目的，也可提供一个不受季节与外部气候环境影响的相对稳定的视觉环境。 In general, the more close to natural light is high, the window which provide the artificial lighting illumination is low, but synthetic intensity of illumination should be maintained illuminance value in the design.

自动调光，保持照度的一致性

一般照明设计师对新建的建筑物进行设计时，均会考虑到随着时间的推移，灯具的效率和房间墙面反射率会不断衰减。 After using intelligent lighting system, although the high intensity of illumination or design, but because of can intelligent dimmer, system will be in accordance with the standards of preset brightness make maintain constant illumination lighting area, and not affected by the attenuation of low efficiency and metope reflectivity of lamps and lanterns, the intelligent lighting control system can save energy one of the reasons.

安装便捷，节省线缆

ABB智能照明系统采用二芯线控制，用EIB总线将系统中的各个输入、输出和系统元件连接起来，大截面的负载线缆从输出单元的输出端直接接到照明灯具或其他用电负载上，而无须经过智能开关。 Don't have to consider when installing any control relationship, again through the software in the system after the installation set the address code of each unit, so as to establish the corresponding control. Because the system only using load cable connection between the output unit and load, compared with the traditional control method to save a large amount of originally received normal switch to cable, also shorten the installation time, save labor cost.

延长灯具寿命

灯具损坏的致命原因是电网过电压，只要能控制过电压就可以延长灯具的寿命。 Intelligent lighting control system with the method of soft start, can impulse voltage control of power grid and the surge voltage, filament from thermal shock, lamps and lanterns to extend service life. Intelligent lighting system can often make life extension 2 ~ 4 times, not only save a lot of lamps and lanterns, and greatly reduce the workload of lamps and lanterns replacement, effectively reduce the operation cost of lighting system, for the extensive use of lamps and lanterns and installation area has the special significance. Using intelligent lighting control system can not only meet the convenient control, lighting and other requirements, and because the significant energy saving effect, Energy saving can reach 20% ~ 50%) And the longevity of lamps and lanterns, Lamps and lanterns of life extension 2 ~ 4 times) , but also lower the operation cost in economic return, also can save most of the power distribution control equipment needed for conventional lighting, and saving wear tube wiring workload is greatly simplified. In addition, the intelligent lighting system and the value of the potential returns, such as intelligent control system can make whole system work in make people the most comfortable state, so as to ensure the people's physical and mental health, improve the working efficiency.