Cheng Yang lighting teach people on how to assemble solar street lamps

At the time of purchase of equipment, are buying directly from the manufacturer. And in order to convenient transportation, usually equipment to remove, then reached the designated position, then the corresponding assembly. So for operation personnel, the use of equipment in time, to understand detailed assembly method, it is very important. Because only in this way, can the corresponding performance better. Especially in the use of solar energy street lamp, to understand detailed assembly method, it is very important.

first, at the time of assembling, should prepare the corresponding tools. Required tools, mainly have a multimeter, inner hexagon spanner, phillips screwdriver, long nose pliers, the corresponding tools such as insulating tape. After the corresponding tools to complete, so you should choose a safe environment, and used the site location, close to the installation of accordingly. But at the time of assembling, should understand somewhat to the assembly sequence of specific, different assembly sequence, the corresponding effect, nature will be different.

the second, when unpacking processing should be according to the listing form, to check for the corresponding parts. If lack of, should be timely and manufacturers to understand. Of course also should check of spare parts, because in the transport process, will inevitably result in case of damage of parts. Once found the damage situation, then it should be replaced.

the third, the installation of solar street lights, should also be to use gaskets, main effect is to prevent wear and tear, so that it can prolong the service life of street lamps.

the appended drawings: