Can install the sun solar garden light lamp battery should pay attention to what

Install solar street light battery should pay attention to what principle? Small make up to you, the main content is as follows: 1. Shelved in removal of solar street light foundation sundries in mud and cement tank battery compartment, make sure that no foreign bodies blocked drain holes; 2. Review the battery compartment for



install solar street light battery' Solar street light battery is a battery in the application of solar street lights, solar street light battery is used to produce solar cell components of electricity storage, when light is insufficient or another new energy street lamp, night lighting. 。 。 】 What principles should pay attention to? Small make up to you, the main content is as follows:

1. Remove the solar street lamps Solar street light is a crystalline silicon solar battery power supply, valve control type sealed and maintenance-free battery ( Gel battery) Store electricity, super bright LED as light source, lamps and lanterns and controlled by the intelligent charging and discharging controller, is used to instead of the traditional public power lighting lamps. 】 Foundation put in the battery compartment sundries in mud and cement tank, to ensure that no foreign bodies blocked drain holes;

2。 Have examined the battery compartment without destruction, at the same time can detect the battery voltage is normal, if appear strange sentence to nonconforming, block installation. With insulating tape 【 Insulating tape is an electrician class supplies, also called electrical tape, used to bind up the thrum of the bare or metal insulation effect, avoid accidental electric shock or short circuit. 】 The parcel sheathed wire poles.

3。 Put battery compartment, dismantling and used cranes so in advance to play good foundation, and then position the two double on coherent hose wire type hoop will battery line through the cage after 【 Cage, also known as the king of earth cage net, cage, etc. 】 Prefabricated pipe, the prefabricated pipe evenly coated with a layer of 7091 after sealing silicone insert the other end of the coherent hose to the roots of the prefabricated pipe, use a screwdriver to double wire type bolts on the hoop. To wear the battery line from prefabricated pipe set again after a period of threading hose, position the two double wire type on threading tube hoop, prefabricated pipe evenly coated with a layer of 7091 after sealing silicone put to the root of the prefabricated pipe threading hose, use a screwdriver to double wire type bolts on the hoop, finally will battery wire fixed to the nozzle.

4。 Put in clear foundation plate of impurities such as dirt, sand;

5。 On the cover, put in the foundation and put on hold. When put cover plate, avoid foundation sediment around fall into the ground;

6。 Taking asphalt mixture with fine sand ( Asphalt: sand = 1:3) Over the plate and cover plate around 40 mm;

7。 Fill in clay or stone. Fill cover clay or stone, the filling covers 10 cm, tamper hale, to 10 cm above the ground.

if you want to learn more about solar street lamps factory, please pay close attention to the photoelectric!