Before and after the installation of solar street lamps

- -

with the improvement of farmers' life and material level, demand for road lighting is becoming more and more big. Now the solar street light has become a trend of rural road lighting, became the beautification is an important component of the rural landscape. In order to ensure the correct installation of solar street lamps, we have to do some preparation work in advance.

. To understand the characteristics of solar lamps, light source, lamp posts, in view of the actual and the reference standard of lighting, road in combination with the budget of the investment, rationally choose solar lamps, the LED light source, lamp posts, in order to give full play to the light source of high efficiency and energy saving, solar lamps and lanterns of light distribution, accessories combination advantage.

. Under the condition of light performance guarantee, appropriately increasing the spacing between the solar street lamps, in order to save the number of solar street light; Raise the solar light pole height, to improve the lighting effects; As far as possible in the middle of the road space with cloth rod, to save the engineering cost.

. Road engineering, timely intervention pole selected in advance, foundation construction and embedded, in order to find problems in time, reasonable changes to ensure the quality, save investment.

. According to the actual situation of the project site and geological solar street lamps, design and production of solar energy light pole, ensure solid foundation. Special attention should be paid to the embedded bolt and bar hole adapter, accurate positioning, embedded length and the length of stay outside is reasonable, the threaded portion shall be properly protected, to facilitate hoisting position.

. Note that after installation of solar light pole is beautiful. Starting from the foundation construction, the lamp will be subject to the mainline control good linearity, and reasonably according to the road design linear change, light pole straight, processing of weld and repair the mouth to avoid the line direction, and consistent across the board. Light pole cantilever Angle to keep the direction and Angle coordinate.

. Solar accessories inside the lamp plug thing to tight, stuck, avoid the wind set loose and poor contact and cause failure. Solar street lamps and lanterns and light pole, light pole and reliable fixed cantilever.

solar street lamps installed correctly is very important, if there is an error in the installation process, will affect its life and use effect, so more attention must be read carefully, if still have what not understand of place, can be directly consulting our lighting technicians.