Based embedded light, matters needing attention

- -

light, beautiful beautiful, practical effect is good, now is widely used in road lighting. Light, safety performance mainly depends on its basement, is critical, so light, the basement is important to note the following.

and high lamp foundation and installation location of soil conditions, and the height and weight of the light, there is a direct relationship, at the time of design and production of light, these aspects must be taken into account.

all of the fasteners, except for the bolt to accept the stainless steel material, this material use time for a long time, and easy to manipulate. Moreover in fastening nut, must add gasket, or a trampoline. The distance after fastening screws exposed nut shall not be less than two pitch.

and high lamp base to reserve balance cable threading pipe, the pipe threading is commonly accepted hot dip galvanized steel pipe, as well as the reinforcement of foundation strength, etc. , this provides the basis for future high lamp construction and convenient.

and need to be set at the top of the light, the position of the lightning rod, and the lightning rod should independent setting, needle is generally half a metre long, it is important to note that lightning rod tip can't plastic spraying, around the base of lamps and lanterns should set aside the earthing body, here in the face of grounding resistance, earth accepted length has specific requirements, such as, so in fabrication and installation must be in accordance with the relevant requirements for the construction. Have light pole grounding body, lamp and distribution box and so on carries on the reliable connection, finally forms the reliable conductive pathways.

all in all, light, the quality of the basement, the safety performance of light played a decisive role, you should be careful in the process of installation.