Now is one of the more common building lighting products are mainly composed of digital tube, because it is cheap and the effect is ideal, this is the main reason for it is widely used, but good and evil people mixed up due to the quality of the digital tube, plus some lighting company construction level is too low, guide
at present, the most common building lighting products mainly digital tube, because their prices are low, the effect is ideal, the main cause of this is that they are widely used. However, due to the digital tube quality is uneven, some lighting company construction level is low, the installation after the effect is not ideal, often appear a few problems, such as digital torch is not synchronous rolling, frequently flashing or not bright, it makes customer very upset, but the method is very simple to solve these problems.
article digital torch asynchronous rolling is mainly caused by the signal controller. There are three digital tube wire, or the positive, negative and signal wire. If there is no press to the correct position of the controller signal lines, after electrify on both sides of the scroll will be out of sync. If the entire line of some of the digital tube lights dimmed after electricity, you can conclude that the power supply has a problem, show that output current or voltage is not enough, resulting in brightness dimmed, as long as a good power supply can be replaced.