loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

Assembly method of solar street light pole

Now, there are more and more application places for solar street lights. Solar street lights can be seen everywhere in cities and in rural areas, and their advanced nature is becoming increasingly prominent.

Assembly method of solar street light pole

1. Check to determine whether the lamp pole model is correct (such as single head, double head) in the installed position, and match the corresponding length and short arm; cut the appropriate wire to the corresponding position, generally reserve 150MM at each end of the stripping wire.

2. Install the jumping arm and lamp head, determine the position and level of the lamp, and take the lamp pole as the benchmark.

3. After wiring, check whether the light wire is fastened firmly.

4. Connect the light source and threading, connect the wires correctly according to the instructions, pay attention to the positive and negative poles.

5. After connecting the line, check whether the connection is firm. During the installation of the light source, pay attention that the light projection surface of the light source should be perpendicular to the ground, not the mounting arm surface.

6. After connecting the light source, first use a multimeter to test its resistance value and whether it is grounded with the rod body, and then use the battery to test the light to confirm that the connection is correct.

The above assembly methods of solar street light poles are shared here. In a word, solar street lights have good product integrity, competitive price, convenient transportation, and installation, and can play a certain lighting effect. The timing dimming function of the controller or the human body sensing function of the controller works, and the battery is powered by a lithium battery, which has a good charge cycle and deep discharge characteristics.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service