Assembly method of solar street light pole

Now, there are more and more application places for solar street lights. Solar street lights can be seen everywhere in cities and in rural areas, and their advanced nature is becoming increasingly prominent.

Assembly method of solar street light pole

1. Check to determine whether the lamp pole model is correct (such as single head, double head) in the installed position, and match the corresponding length and short arm; cut the appropriate wire to the corresponding position, generally reserve 150MM at each end of the stripping wire.

2. Install the jumping arm and lamp head, determine the position and level of the lamp, and take the lamp pole as the benchmark.

3. After wiring, check whether the light wire is fastened firmly.

4. Connect the light source and threading, connect the wires correctly according to the instructions, pay attention to the positive and negative poles.

5. After connecting the line, check whether the connection is firm. During the installation of the light source, pay attention that the light projection surface of the light source should be perpendicular to the ground, not the mounting arm surface.

6. After connecting the light source, first use a multimeter to test its resistance value and whether it is grounded with the rod body, and then use the battery to test the light to confirm that the connection is correct.

The above assembly methods of solar street light poles are shared here. In a word, solar street lights have good product integrity, competitive price, convenient transportation, and installation, and can play a certain lighting effect. The timing dimming function of the controller or the human body sensing function of the controller works, and the battery is powered by a lithium battery, which has a good charge cycle and deep discharge characteristics.