In recent years, with the improvement of living standards, more and more families have installed solar street light. But my dear friends, do you know the solar street lamps controller installation considerations? Believe that this is also the most concern of the consumers. Don't panic, we simply introduce to everybody. Hope to be able to help in everybody's life!
1, the controller before installation should be checked out any certificate of production, product specifications, quality, warranty card, according to the drawings to check its specifications, the phenomenon such as appearance inspection to see if there is any breakage.
2, solar lED lighting controller, generally with lamps and lanterns, is installed in the outdoor. Because of the influence of external environment condition, easy to cause the leakage and short circuit, temporary or permanent fault. So the controller must be able to seal, moistureproof function, protection grade reaches IP65.
3, the controller can not directly on the battery, although often adopt measures such as maintenance-free battery, but inevitably produce battery corrosion gas, can cause bad effects to the electronic components of the controller, the formation of the problems.
4, solar panels, controller protection device of main loop and the earth ( The shell) Between the insulation resistance shall be not less than 1 megohm, should be able to withstand AC1000V/min power frequency ac withstand voltage, no flashover, breakdown phenomenon.
5, controller and solar panel and battery connection wire, should fully consider the low voltage large current factors. Conductor cross-sectional area to meet current safety requirements for terminal pressure must be strong, and should have locking device.
6, a control wiring order: the controller manufacturer connection order will have difference, please in strict accordance with the controller manual connection. My dear friends, after hearing the introduction of small make up, are you well? The down quickly!