loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

About the impact of lightning on solar garden lights and preventive measures

The price of each garden lamp is different. In addition, some poles require embossing or other special shapes. The base of solar garden lights is usually die-cast aluminum. There are also some main products made of copper or alloys on the market. Aluminum and other materials are usually expensive to make by hand. The transparent part is made of acrylic or printed board. These materials have the characteristics of good light transmittance, anti-oxidation UV, not easy to yellow, and long service life.

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e The solar garden light pole is made of aluminum or steel, and the outside is galvanized and sprayed with anti-corrosion and anti-rust treatment. Usually, fluorocarbon paint is applied to the surface to add anti-ultraviolet powder to improve the corrosion resistance and oxidation resistance of the electrode. The appearance color of the light pole can be made according to the relevant requirements of the customer, or it can be produced by the customer.

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e Solar garden lights are installed outdoors. When it rains, lightning is inevitable, so lightning strikes become a great threat. The light can damage the solar garden lights, and the heavy light can cause fire or casualties, causing huge losses. The following garden light manufacturers will introduce the impact of lightning on solar garden lights and preventive measures:

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e 1. Combination of external lightning protection and internal lightning protection

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e At present, the outer part of general solar garden lights is made of conductive material, which is equivalent to the lightning rod itself. In the design, down conductor and grounding network must be installed. These systems constitute an external lightning protection system. The system can avoid fire and personal safety accidents caused by the direct lightning strike of the solar garden lamp. The internal lightning protection system refers to the protection of the equipment inside the solar garden light through grounding and voltage protection. The system can prevent lightning induction and other forms of overvoltage intrusion, resulting in damage to the power supply, which cannot be guaranteed by external lightning protection systems. The two are complementary. The internal lightning protection system must be connected to the external lightning protection system or overvoltage protector on many devices, such as the enclosure, the cables entering and leaving the protected area, and metal pipes, as well as equipotential bonding.

u003cbru003e

u003cbru003e

u003cbru003e 2. Lightning protection equipotential connection

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e Completely eliminate the destructive potential difference caused by lightning. Power lines, signal lines, metal pipes, etc. must be equipotentially connected with overvoltage protectors, and local equipotential connections must also be made at the interface of each internal protection area. The equipotential bonding must be connected to each other and finally to the main equipotential bonding.

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e 3. Set up lightning protection zone

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e At present, in addition to power supply equipment, solar garden lights will also be equipped with some communication equipment to control the switch and brightness of solar garden lights. These devices and power supplies need to be placed in the lightning protection zone, and the protection zone is directly shielded by the shell. The electromagnetic field here is much weaker.

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e 4. Lightning protection module and overvoltage protection module

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e The function of lightning protection equipment is to connect the protected system to the equipotential system in a short time, so that each port of the equipment is equipotential. At the same time, the huge pulse energy generated by the lightning strike in the circuit is released to the ground through the short-circuit line, which reduces the potential difference at each interface of the device, thereby protecting the device.

u003cbru003e

u003cbru003e

u003cbru003e The above is all the content shared by the garden lighting manufacturers.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service