A brief summary of the installation problems of led solar street lights

In recent years, with the improvement of social living standards, more and more places have gradually installed led solar street lights. However, many consumers still don't know much about the installation of led solar street lights. In this regard, we also summarized briefly. The controller of the solar street lamp lighting device is generally matched with the lamp and is installed outdoors. Due to the influence of external environmental conditions, it is easy to cause leakage and short circuit, resulting in temporary or permanent faults. Therefore, the controller used in the solar lighting street light must have the function of sealing, moisture-proof, and the protection level should reach IP65. The insulation resistance between the main circuit of the solar panel and the controller protection device and the earth (shell) should not be less than 1 megohm, and should be able to withstand AC1000V/min power frequency AC withstand voltage without flashover or breakdown. When installing led solar street lights, please note that the controller cannot be placed directly on the battery. Although maintenance-free batteries are often used, the battery will inevitably produce corrosive gas, which will adversely affect the electronic components of the controller. The formation of hidden troubles. For more industry information or product prices, you can call toll free: 4000-760-286