30 watts of solar street light prices

As for new rural construction, more solar street lamps instead of the traditional old mains street lamp. During the installation process, a lot of solar LED street lamp manufacturers did not bring detailed installation instructions to customers, many customers in accordance with the traditional methods to install solar

with the development of new rural areas, more solar energy street lamp to replace the traditional old commercial street lamp. During the installation process, a lot of solar led street lamp manufacturers not to provide detailed installation instructions, many clients in accordance with the traditional method of installing solar street light, led to install solar street lamps light or night lighting time is short. If during the installation process does not pay attention to some important details, will naturally lead to solar street light doesn't light properly. The following solar led street lamp manufacturer summarizes the solar street lamp installation errors after several solutions. First, at the top of the solar street lamps because there are too many obstacles photovoltaic effect was achieved by the top of the solar panels solar street lamps, solar panels convert light energy into electrical energy and stored in the battery, but the top too many obstacles, affect the solar panels on the absorption and utilization of light energy, reduce charging efficiency. Solution: before installing the solar street light, as far as possible away from obstacles. If is inevitable, to ensure that the solar street lights are south without obstacles, keep lighting for at least six hours in sunny day. Second, the direction of the solar panels is wrong in the wrong direction will lead to solar panels can't fully absorb sunlight to charge. Solution: before installation, make sure the lighting direction of solar street lamps light source, and then determine the direction of the solar panels. Third, the next to solar street lamps and other light source, solar street lamp basically controlled by microcomputer intelligent solar controller, can feel the strength of the light and dark or not, and can automatically adjust the lighting time throughout the year. If the panel near the other light source to open again, lighting control will fail, solar street lights will not be able to normal open. Solution: before installation, as far as possible away from the light source, to avoid interference. If the installation, near the solar street lamps light source cannot be removed, the controller can be set to time control mode.