loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

30 w solar street light in rural areas1

Courtyard lamp manufacturer to each part of the first component is fixed: solar panels fixed on the bracket of solar panels, lamp holder fixed to carry on the arm, then stent with arm fixed to the main stem, and wear the cables to control box ( Battery box) 。 Light pole lifting, first check the

in the first place, courtyard lamp manufacturers fixed every component parts: solar panels on the solar panel bracket, lamp holder on the cantilever, then stent and cantilever fixed on the main stem, connecting to control box ( A battery pack) 。 Before ascension light pole, check whether the parts fasteners and firm, lamp holder installed correctly, light source is working correctly. Courtyard lamp manufacturers and then work in simple debugging system; Loosen the controller on the solar panel cables, light work; Connect the solar panels connecting cable and turn off the lights; At the same time, careful observation of each indicator light on the controller changes; Only when everything is all right, it can be filed and installation. Improve the main lamp pay attention to safety measures; Fully tighten the screw. If there are any deviation component of sunrise view, it is necessary to adjust the components of the direction of sunrise, facing south. Courtyard lamp manufacturers put battery into battery box, and according to the technical requirement will be connected to the controller; First connect the battery, and then connect the load, and then connect the solar panels; In the process of wiring operation, must pay attention to the controller tags on each of the wiring and terminals can't connection error, positive and negative polarity not conflict, not reverse connection; Otherwise, the controller will be damaged. Debug the system is working correctly; Loosen the controller on the solar panel cables, lights; At the same time, connecting solar panels cable and turn off the lights; Then watch carefully controller on the change of each indicator; Only everything is normal, control box garden lamp manufacturers can be sealed.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service