loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

3. Solar street lamps factory install lamps and lanterns of street lamp spacing

1, solar street lamp installation for each component is fixed: solar panels fixed in solar panels, lamp holder to carry in the framework of the arm, then the bracket is fixed on the main stem and arm, and wear cable control box ( A battery pack) 。 2, the light pole lifting



1, solar street lamp installation for each component is fixed: solar panels solar panels at a fixed 【 Solar panels, 太阳能板) Is by absorbing sunlight, the solar radiation through the photoelectric effect or photochemical effect directly or indirectly converted into electrical energy device, the main material of most of the solar panel as the 'silicon', but because of the production cost is larger, so it widely used, we still have some limitations. 】 Fixed, lamp holder to carry in the framework of the arm, then bracket is fixed on the main stem and arm, and wear cable control box ( A battery pack) 。 2, the light pole lifting check whether each part of the fastener and determined before the lamp holder installed correctly, the light work is normal. Then, in the simple debugging system work is normal; Loosen the control cable, light work of solar panels. 3, the main light pole hoisting, pay attention to safety; Screw fastening absolute good, sunrise angular deviation, such as the component needs to adjust the sun depends entirely on the final direction to the south. 4, insert the battery into battery box, according to the technical requirements stated will be connected to the controller; Connect the battery, and then pick up the load, and answer the solar panels; Join operation is important to be aware of is the mark on each terminal and the controller is not wrong, plus or minus 2 polarity can't collision, can't meet; Otherwise, the controller will be damaged. 5, the debugging system work is normal; Loosen the controller of the solar panels on the wire, light; The solar panels cable connected to the stated, light; Look carefully, at the same time controller change each indicator light; Everything is normal, can seal control box.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service