2 safety light 0 meters high lamp configuration and the matters needing attention

20 meters high light pole for eight arrises, 12, 18 sprayed rod body, by the high strength and high qualified steel plate after cutting, bending, automatic welding, average height is 2, 5, 3 0, 3, 5, 40, such as specifications, design the biggest wind resistance ability to 6 0 m/s,

traffic light with a 1. 20 meters high pole, pole as 8, 12 and 18 while pyramid. They passed by high strength and high quality steel plate shear, bending and automatic welding. Average height is 25, 30, 35, 40, and other specifications. Maximum wind resistance design of 60 m/s. Each specification including three to four. The diameter of the flange steel chassis is 1 m to 1. Thickness of 2 m, 3 0 mm to 40 m. 2. Main functions based on the frame structure, decoration materials mainly steel tube and steel tube. Light pole and a panel with hot dip zinc processing. 3. Electric hoist system consists of an electric motor, a hoist, control three sets of hot dip galvanized steel wire rope and cable, etc. Light pole installed within the body, the vertical speed of 3 to 5 meters per minute. 4. Guidance and unloading system is composed of guide wheel and guide arm, to ensure the lamp panel not lateral movement in the process of ascension, and when the lamp panel upgrade in place, lamp panel will automatically fall off the hook and lock. 5. Lighting electrical system is equipped with 6 - 24 4 0 0 w - 1 0 0 0 w metal halide lamp ( The white light) , project-light lamp, and floodlight. The computer time controller can automatically control the lighting and local lighting or lighting switch time. 6. Lamps and lanterns of lightning protection system: 1 at the top of the installation. 5 m long lightning rod, based on the underground installation 1 m long ground wire, ground wire and underground bolt welding.