15 m ~ 35 m hook type automatic lifting the rise and fall of the light, mosquito

Automatic elevating high lamp light pole height can be customized to 15 m ~ 35 m, elevating light, main effect is convenient with lamp on the maintenance and replacement of lamps and lanterns, the lifting operation is mainly a coil of wire rope and refund the operation control of the hoist forward and inversion of wire rope and



automatic elevating high lamp' Light, generally refers to more than 15 meters steel conical light pole and high-power modular fixtures are composed of new type of lighting. 】 Light pole height can be customized to 15 m ~ 35 meters, elevating light, main effect is convenient with lamp on the maintenance and replacement of lamps and lanterns, the main lifting operation is a coil of wire rope and refund the operation control of the hoist and put forward and inversion of wire rope so as to achieve high lamp light plate of rising and falling, lifting hook type high lamp when installing lamp plate after the rise to the top do not hang the lamp panel directly by the cable force of the hook on the top of the light, so as to reduce the stress of the steel wire rope, and high lamp lights during normal working peace plate is hung on the hook, drop by decoupling and then we will fall to the bottom of the light pole lamp panel, hook type automatic lifting the rise and fall of the light, and the decoupling link operation method is as follows:

hook type automatic lifting high lamp light dish drop operation method:

1, lamp plate down decoupling operation:

( 1) Dial the headlamp unit power plug

( 2) Will control the hook switch to: 'decoupling'

( 3) Plug in the plug of the cable lifting control switch

( 4) Press the control button up key first, make the light dish rose to the limit switch position, lamp plate automatic stop, this is hat lamp panel has decoupled;

( 5) Press the control button down key straight after decoupling, jacket lamp plate descends;

( 6) Plate down, fall on the bracket position ( Brackets should be installed in front of the shed light plate) Press stop, stop down, fuck lamp posts for the completed

2, lamp plate up, peg operation process:

( 1) Will switch to 'hook'

( 2) Plug in the plug of the cable lifting control switch after completing the above procedure can be carried out operation.

( 3) Press the up key, light dish rise, to the top limit switch, automatic stop

( 4) Press down key, light dish is a bit down

( 5) When ZhuGangLan capstan with flabby phenomenon ( Please pay attention to watch) , namely the stop button to stop, this time the lamp plate has been in the 'link status', increase operation is successful.