12 m solar street light construction costs

Solar LED garden light daily installation time, questions about foundation pouring, shandong street lamps factory lighting lamps manufacturer to remind everybody, just keep in mind the following points: 1, determine the floorlamp location; Survey and geological conditions, if the soft soil 1 m 2 are the surface, then the

in solar led garden light daily installation process, the basis for pouring, shandong street lamp factory lighting lamps remind everybody to pay attention to the following: 1, determine the position of the vertical light; According to the geological survey, if the surface is 1 m ~ 2 soft soil, the excavation depth should be deepened. At the same time, make sure that the mining below position no other facilities ( Such as cable, pipes, etc. ) , street lamp at the top of the shade for a long time, otherwise should be appropriate to change position. 2. Floor lamp position reserved 1 m 3 standard pit; Embedded parts of the positioning and casting. Embedded parts are placed in the center of the square hole, one end of the PVC pipes placed in the middle of the embedded parts, the other end is placed in the place of the battery. Keep the embedded parts and foundation and the ground at the same horizontal plane ( Or screw the top with the original ground on the same horizontal plane, depending on the field need) On one side, and should be parallel to the road; In this way, we can ensure that lamp is vertical, not skewed. Then with C20 concrete pouring, or stop using the vibrator vibrating in the casting process, to ensure the overall compactness and strong degree. 3. After installation, clear in time the residual sludge of the positioning plate, and waste oil cleaning impurity on the bolt. 4. Concrete solidification process, should be watered regularly maintenance; Until the concrete completely solidified ( More than 72 hours) , to install droplight. The remarkable rapid screen sales promotion