Yi Qixiu for solar street lamps and light, a basic understanding

The classification of the light, generally can be divided into the lift and the lift. Elevating the main stem height is generally more than 18 m, electric lift is easy to operate, lamp plate to work place, can automatically set off automatically, hanging ditch, unloading and wire rope. Lift high lamp set hand

the classification of the light, generally can be divided into the lift and the lift. Lift the main stem height generally in more than 18 m, electric lift is easy to operate. Raised to the working place, the lamp panel panel can automatically remove, hanging in the slots, wire rope can be unloaded. Lift high lamp is equipped with manual and electric hoist control mode, make the lamp panel can be safe and reliable underground dropped to the ground. 2. 5 meters, easy to maintain. Lead wire length is 10 meters of the manual remote control device, the operator in the rise and fall of 5 meters remote control lamp plate, ensure the personal safety of the operators. Lift high lamp also is equipped with a spare cable. When the lamp panel fell to the lowest position, one end of the cable inserted into a socket in the electric control system, on the other end inserted into the lamp panel in the junction box, so the lamp panel can direct power supply, lamp can repair. Lifting light, all the protection class reaches IP65 international standard of lamps and lanterns, to prevent dust and rain water from entering the, ensure the service life of the bulb. Lights are usually made of corrosion resistance of aluminum alloy and stainless steel. Install high lamp the preparation of 1. According to the loading and packing list carefully check all parts. 2. Check whether the parts is damaged, bent or distorted, zinc layer is damaged. 3. Each part of the logo on the rod body indicates the type of the rod body, the order number and the number of section. The weight of the rod body tag on the inside of the rod body with a marker pen. Nuclear delivery is correct, the crane lifting capacity will be enough. 4. According to the drawings provided by connection of maximum and minimum casing pipe marking rod body. Unit 1. Every joint with a socket length, but as a result of manufacturing, and installation error and physical factors, socket length will have change, so the biggest socket length and minimum socket length. 2. For ease of installation and may require lubrication fitting surface. Be careful not to use oil to prevent leakage and pollution of the rod body. Internal and external surfaces of the socket can use soap and water lubrication. 3. Should exert the necessary force at both ends, in order to obtain a tight socket.