Knowing that consumers are concerned about the heat dissipation of LED street lamps, LED street lamp manufacturers have to focus on solving this problem in order to win the patronage of consumers. It is said that the customer is God, and we must try our best to solve the customer's problem. At present, LED street lamp manufacturers have thought of three methods for heat dissipation. One is that many LED street lamp manufacturers use high-tech materials to dissipate the heat, because the temperature of ordinary aluminum plate heat dissipation is only 3-5 degrees Celsius higher than the bottom of the radiator, but a material with particularly good heat conduction is used. Under the premise of zero resistance, the heat dissipation is 3-5 degrees Celsius lower than the current aluminum plate, and the effect is better. The second method is to use heat pipes to conduct heat. Heat pipes conduct heat through the circulation of air to take away the heat. The circulation of air is maintained by the heat dissipation fins. Now the heat dissipation on the integrated circuit board is mainly conducted by heat pipes. Although the first two methods are simple, the effect is not the most ideal. More LED street lamp manufacturers use aluminum plate heat sink fins. The aluminum plate is made into a grating shape and its back is close to the LED circuit board. The heat dissipation area is appropriately increased. The heat dissipation body is made of LED insulation and heat dissipation plastic instead of aluminum alloy. Increase the heat radiation capacity. In this way, heat dissipation is enhanced and the cost is low. This information is exclusively provided by the solar lamp factory lighting, sourced from: http://.