Shop Best Indoor Outdoor Patio Lights in ALLTOP Lighting

Actually, many producers are reputable in producing solar panel lights in China. You are expected to be sure about the needs and find the specific manufacturer. In general, the producer ought to be trusted by product quality, pricing and service. Zhongshan ALLTOP Lighting CO., LTD is recommended, thanks to this well recognized high performance-cost ratio.

By focusing on manufacturing led high bay lamp, ALLTOP is globally recognized. ALLTOP provides a wide range of led wall light for customers. solar street lamp is designed according to the factual demand. Its prominent merit is that it has solar street light manufacturer. Made of the die casting aluminium alloy, the product has a good metal texture. ALLTOP's solar street light covers a wide sales network. Made of the die casting aluminium alloy, the product has a good metal texture.

our company holds the idea of solar flood light kit to have a better development. Get info!

People need to build the characteristic in the urban construction, creating city individuality, embody city science and technology and city culture.

Landscape lighting in China and the world, as a means of foil, strengthening the cities, has become a kind of culture, be


in the urban construction, people need to build the characteristic, shape the city individuality, reflect city science and technology, show the city culture.

In China and worldwide, landscape lighting as a way of contrast and to strengthen the city appearance, has gradually become a kind of culture and the humanities landscape, services for the sustainable development.
What is a solar landscape lamp?

Solar landscape lamp is a kind of for solar energy street light.

It USES solar energy as power supply, provide the road lighting at night.

As long as there is enough sunshine, it can be installed at the scene.

Because it does not pollute the environment, so called green environmental protection product.

Lamp and battery components in integrated design, has the ability to resist wind.

Internal using intelligent charge and discharge control technology and microcomputer lighting and time.

Products adopt efficient solar street lamps light source design, with high brightness, easy installation, stable and reliable work, without laying cable, do not consume conventional energy, long life and other advantages.
Solar street light is made up of what?

It consists of solar cell module, battery, power controller and a luminous module.

The specific technical features are: high power, 150 watts - when the brightness of incandescent lamp

250 watts, can the normal work of the four consecutive rainy days, lighting for eight hours a day;

Using photoelectric intelligent controller with charge and discharge protection functions, photosensitive device of automatic control and time control device, make effective energy saving products, increase the effective lighting time, reduce the production cost.

Solar technology development co. , LTD. , always pay attention to product quality, and perseverance.
The quality is the life of the enterprise.

At the same time, we have been focused on research and development of new products and listen to the opinions of the customers, which made us in market competition continue to grow stronger.
；
Quality first, reputation first, customer first;
This is our consistent goal;
To the quality strives for the survival, to management efficiency;

Is our enterprise creed, we wholeheartedly for the general new old customers with the best service.

Welcome general customers come to order, ordering hotline 17368065577

Green: green signals is allowed to pass.

According to the traffic safety law implementing regulations 'regulation: when the green light to allow vehicles and pedestrians, but turning vehicles are not allowed to interfere with release of straight traffic vehicles and pedestrians.

Red light signal: the red light signal is


green light signals: green light signals is licensing.

According to the traffic safety law implementation regulations, when the green light, traffic and pedestrians can go, but the turn of the vehicle shall not interfere with straight vehicles and pedestrians.

Red light signal: red light signals is absolutely no thoroughfare.
Vehicles are not allowed to pass when the red light is on.

Right turn vehicles can not interfere with vehicles and pedestrians pass.

Red light signals is mandatory significance ban.

Encounter this signal, a ban on vehicle must be parked outside the you, must ban pedestrians on the sidewalk waiting for release.

Motor vehicle waiting for release, no parking, open the door, all kinds of vehicle drivers are not allowed to leave the vehicle.

Turn left when go outside, do not allow the bike from crossing go straight when not allowed to turn right.

Yellow light signals: when the yellow lights up, has over the vehicles you can continue to pass.

The meaning of yellow light signal between the red and green light signals.

It has not allowed by one side, also has allowed through.

When the yellow lights, drivers and pedestrians were warned transit time is over, and will immediately become a red light.

Cars should stop after you, pedestrians must not enter the crosswalk.

However, cars can continue to pass, if they cross the stop line, because they were too close to the stop.

Already on the pedestrian crossing pedestrians or through as soon as possible, or stay where, back either.

Flashing warning light is a continuous flashing yellow light, remind of vehicles and pedestrians should be careful when through, and after through security.

The lamp does not control the traffic and to allow traffic through the effect.

Some pause at 0 + crossing, some only at night after the traffic lights stop using use yellow light and flash to remind vehicles and pedestrians crossing ahead.

They should drive carefully, carefully observe the light pole through monitoring pole and safety.

Vehicles and pedestrians by flashing warning signs and flashing lights intersection, should follow the principle of ensuring security, at the same time should abide by banning the use of traffic signal or traffic sign control of intersection traffic rules.

Direction indicator light direction indicator is a kind of special light guide the direction of the vehicle.

It is composed of different arrows, indicating the vehicle is go straight and turn left or turn right.

It consists of red, yellow and green arrow pattern.

In 1843, the first street lamp appeared on the streets of China. Although it was lit by kerosene, it was more sacred than moonlight in people's minds. Later, the street lights in the concession were changed to gas lights. It was transplanted from London, and the brightness is several times higher than that of kerosene lamps. In the eyes of pedestrians at night, it is simply the 'sun' at night. It was not until 1879 that China’s first electric light was finally lit up at the Ponte 16 Pier, equipped with a 10-horsepower internal combustion engine generating unit.
Entering the 21st century, 'energy saving and emission reduction' has become a global call for energy saving and has attracted much attention. Among them, lighting energy saving is a very important part of 'energy saving and emission reduction'. Traditional lighting brings about a large amount of carbon dioxide and other gas emissions, which will have an increasing impact on the environment. With the rapid development of urban lighting, the above problems will also More prominently, street lamps account for a considerable share of electricity consumption for lighting. Because of the long working hours of the lines and the huge energy consumption, it is imperative to promote green lighting. Ensuring that every lamp is lit on time and on demand, and can effectively save the electricity consumption of street lamps, extend the life of the bulb, and reduce the cost of maintenance and management is the goal pursued by a modern efficiency-based society. Therefore, the exploration and application of a new type of green lighting power supply is of great significance to the goal of greenhouse gas emission reduction. Solar energy is widely used in production and life because of its pure green, pollution-free, inexhaustible and inexhaustible characteristics. Therefore, solar street lights are spreading and developing in cities, rural areas, mountainous areas, coastal areas and other areas with sufficient solar energy.
For more product information, please click: http://www./article_list_11.html

Nowadays, many schools and kindergartens have installed ultraviolet disinfection lamps as indoor disinfection tools. However, because of the application in these places, we need to pay more attention to the method of use when using ultraviolet disinfection lamps and strictly abide by the relevant management requirements.

How to use:

1. The ultraviolet disinfection lamp must be used indoors without people. The classroom is closed during the disinfection period, and non-disinfection personnel is not allowed to enter.

2. When using ultraviolet light for sterilization and disinfection, warning signs must be set outside the premises to remind others not to enter or stay.

3. The UV lamp must be on for 5-7 minutes after the lamp is on, and it can be moved after it has cooled down.

4. During disinfection, the disinfected object must be fully exposed to ultraviolet rays and reach a sufficient radiation dose.

5. When disinfecting rough surfaces such as paper and fabrics, the irradiation time should be extended appropriately, and both sides should be irradiated.

6. The disinfection effect is affected by environmental temperature, relative humidity, suspended particles in the air, and the disinfection object is affected by organic pollution. When disinfecting indoor air, the room must be kept clean and dry to reduce dust and water mist; the temperature is lower than 20°C or higher than 40°C, and the relative humidity is greater than 60%. When it is affected by organic matter, the exposure time must be appropriately extended.

7. During the use of the UV lamp, keep the surface clean and dry. Wipe it with alcohol gauze or cotton ball once every 1-2 weeks. If there is dust or oil on the surface of the lamp, wipe it at any time.

8. When disinfecting the surface of the object, the distance between the lamp tube and the contaminated surface should not exceed 1m, and the irradiation time should not be less than 30min when the ultraviolet radiation intensity of the lamp tube meets the requirements. The high-intensity, the low-ozone ultraviolet germicidal lamp can irradiate within an effective distance of 30min~60min. The effective disinfection area is 1.5m~2m around the lamp tube. When disinfecting indoor air, if indoor suspended ultraviolet disinfection is used, install the ultraviolet lamp with a reflector at a height of 2m~2.5m, and the number of installed lamps shall be calculated at not less than 1.5W/m3. If it meets the requirements, the irradiation time is not less than 30min.

9. After disinfection, turn off the ultraviolet light, open the doors and windows, and enter the room after sufficient ventilation.

10. Disinfectants should take personal protection to avoid damage caused by direct ultraviolet radiation.

11. Daily monitoring is required for ultraviolet disinfection. Daily monitoring includes the start time of lamp use, cumulative exposure time, and the user's signature. The radiation intensity of the new UV lamps should not be lower than 90μW/ cm2. The radiation intensity of the ultraviolet lamp must be measured regularly, and the ultraviolet lamp tube should be replaced in time when it has been used for 1,000 hours or when the intensity is lower than 70μW/cm2. Use a qualified ultraviolet illuminance meter to detect the irradiance intensity of the ultraviolet lamp, and the ultraviolet illuminance meter shall be calibrated at least once a year.

Management requirements:

1. The ultraviolet disinfection lamp must be managed, used, and registered by a special person. Establish a UV usage record account to record the start date of each UV lamp, the time of each disinfection, the cumulative disinfection time, the name of the disinfection personnel, etc.

2. Schools and kindergartens shall establish a standardized ultraviolet disinfection lamp operation system, management system, and emergency plan. Without the approval of the responsible comrades of schools and kindergartens, no one is allowed to use ultraviolet disinfection lamps. In the event of an emergency, the emergency plan is immediately activated.

3. If the relevant regulations are violated, the responsible persons of the school and kindergarten will be held accountable.