Floodlight Company Trend Report

Solar street lamps factory for you about street lamp manufacturing process six steps: 1. Parts inspection, all the raw material according to the size of the corresponding inspection; 2. Light pole manufacturer of lamp bead welding to the aluminum substrate, and the lamp bead board held test; 3. The constant current source ( Drive) A patch,




solar street lamps factory about street lamp production process for you six steps:
1. Parts inspection, all the raw material according to the size of the corresponding inspection;
　　2. Light pole manufacturer of lamp bead welding to the aluminum substrate, and the lamp bead board held test;
　　3. The constant current source ( Drive) A patch, plug-in, wave soldering and reflow soldering, and holding device, testing, aging;
　　4. Device: the lamp bead board, constant current source, Drive) Lamp shell device together; For guaranteeing the cooling is excellent;
　　5. The whole lamp inspection after the placement of lamps and lanterns, need to do a series of examine brilliant guaranteeing its good character;
　　6. Packaging warehousing production set equipment deployment vary widely according to the workshop intrusive high lamp light pole factory, important is: reflow soldering, wave welding machine, SMT machine, vertical or horizontal photometric diffuse yan ( Light distribution curve, flux and other parameters) , production capacity.

Solar panels and renewable energy distributed generation is according to solar street lamps, and the influence of wind speed and other natural factors. It has obvious random and intermittent characteristics, output power fluctuation range, especially the power electronic devices in the distributed power generation equipment, use the




solar panels and renewable energy distributed generation is according to solar street lamps, and the influence of wind speed and other natural factors. It has obvious random and intermittent characteristics, output power fluctuation range, especially the power electronic devices in the distributed power generation equipment, users and is widely used in traditional power grid. The bidirectional interaction for the safe and economic operation of power grid and power quality has important influence. Traditional grid especially the certainty of the distribution network planning and operational theory is difficult to meet the large-scale access of polymorphism distributed energy. Consider the implementation of active power distribution network based on hierarchical storage national energy strategy and the rationalization of renewable energy. Use and improvement of the environment has important economic and social significance.
the traditional distribution network is a kind of single-phase flow of radiant power distribution network, an urgent need to develop.

The introduction of anti-glare floodlight W of anti-glare access light, the anti-glare access light NSC developed by our company, uses nano-photocatalyst glass, which can automatically decompose surface stains and maintain light transmission. It can be adapted to cables with different diameters of φ~mm according to the needs of the site, and multiple lights can be connected in parallel. There are multiple installation methods such as wall-mounted and ceiling-mounted, and the illumination angle can be adjusted arbitrarily within the range of up and down according to needs. High-strength alloy materials are selected, which have strong resistance to strong collisions and impacts; multiple shock-proof structures and surface coating treatments can work for a long time in subgrade and rail high-frequency vibration and humid and high-temperature environments. Diffuse reflection technology and protective angle design can effectively prevent glare; at the same time, nano-photocatalyst glass can be used to automatically decompose surface stains and maintain light transmission. Rated voltage VAC Hz Shell protection IP rated power: W/W MH/HPS gas discharge bulb lead-in cable φ~φmm overall size × × mm total weight Kg

High-power and high-efficiency NYF anti-glare floodlight large-scale substation renovation project optimization of the lamp two technical parameters Rated voltage VAC Hz Shell protection IP rated power: W/W MH/HPS gas discharge bulb lead-in cable φ~φmm overall size × × mm total weight KgNYF Special high-efficiency, long-life gas discharge bulbs are used as the light source; when the double-tube HPS lamp is used, it can be started and restarted immediately without cooling. NYF uses high-strength alloy materials, which have strong resistance to strong collisions and impacts; multiple shock-proof structures and surface coating treatments can work for a long time in subgrade and rail high-frequency vibration and humid and high-temperature environments. Year. Day, this NYF warranty year is produced and manufactured by our company Changzhou Lighting Factory Lighting Co., Ltd. It has a variety of installation methods, which can be connected in series and connected in multiple angles. It has a large projection range and a large coverage area. W OSRAM With metal halide bulbs and electrical appliances, the lighting brightness can reach lumens and the lighting time is long. It can be adapted to cables with different diameters of φ~mm according to the needs of the site, and can be used in parallel with multiple lights. Can be used as floodlights, floodlights, to protect your eyes, you are worth buying. Diffuse reflection technology and protective angle design can effectively prevent glare; at the same time, nano-photocatalyst glass can be used to automatically decompose surface stains and maintain light transmission. It can work for a long time in subgrade and rail high frequency vibration and humid and high temperature environment.