Street light pole and light have different processing method and price

Lamp light pole material is Q235A steel silicon content is not greater than zero. 04%, after a large bending machine bending the straightness error is not greater than zero. 05%, the wind resistance capability of the street lamp light pole according to the grade 11 more than 36. 9 m/s design, seismic intensity of 8. Rod of a total height of x m, upper diameter



street lamp light pole material is Q235A 【 Q235A toughness and plasticity is good, has the certain elongation, good welding performance and hot workability. 】 , silicon content in steel is not greater than zero. 04%, after a large bending machine bending the straightness error' Beating straightness error is refers to each point on the straight line or the degree of deviation from the straight line. 】 Not greater than zero. 05%, the wind resistance capability of the street lamp light pole according to the grade 11 more than 36. 9 m/s design, seismic intensity of 8.

stem a total height of x m, upper XMM diameter, bottom diameter of XMM, wall thickness for XMM. There is flange at the bottom of the light pole, the distance between the flange mounting holes for OsLASH; On the basis of X, with anchor bolt installation. （ X for the user to set parameters, or the company in accordance with the normal configuration configuration parameters)

high lamp' Light, generally refers to more than 15 meters steel conical light pole and high-power modular fixtures are composed of new type of lighting. 】 Welding method for automatic submerged arc welding, the welding is reliable, smooth surface, no obvious welding defects such as porosity, bead, bite edge, ultrasonic testing gbl1345 secondary standard requirements.

the galvanized layer surface is smooth and beautiful, light, luster, wrinkled skin, sag, zinc knock against, no peeling, spots, surface defects such as Yin and Yang, the galvanized layer thickness reach more than 86 um, accord with national standard GB/t13912 - Adhesion accord with gb2694-92, galvanized layer The requirement of 88, anti-corrosion life more than 30 years.

street light pole hot dip galvanized 【 Compound and the iron substrate reaction was to make the molten metal and alloy layer, so that the substrate and coating combination of both. 】 Electrostatic spraying after 【 Principle of electrostatic spraying is refers to the use of corona discharge atomize paint burden under the action of a high voltage direct current (dc) electricity, and adsorption in the Netherlands positively charged basal surface discharge coating method. 】 （ Color can choose) 。 Before spraying, should grind arenaceous to increase adhesion. Strict control in the process of spraying curing time and temperature, ensure the plastic layer uniform, smooth, no pores. Coating layer thickness is greater than 1 oum, achieve gb9286 - adhesion A level 880, smooth surface, light, hardness & ge; 2H。

light green. Do not contain mercury, lead and other harmful elements, is conducive to recycling, won't produce electromagnetic interference. Ordinary tubes containing harmful elements such as mercury, lead, electronic ballast of energy-saving lamps will produce electromagnetic interference.

7。 Driven by dc power supply, no stroboscopic, common lamps and lanterns is ac drives, unavoidably produce stroboscopic, this for a long time is bad for your eyes. 8, high photosynthetic efficiency, low heat. 90% of the electricity converted into visible light, ordinary incandescent lamp only 20% of the electricity converted into visible light, the remaining 80% of the electrical energy into heat energy, this is a great waste of limited resources.

high safety coefficient. The voltage and current is small, less heat, no potential safety hazard.

application places: roads, Bridges, car parks, sports venues, yards, ports, airports, public leisure square, etc.