Street lamp price solar lamp design and process the acceptance standards

1. Commonly used solar street lamps light pole is made of high quality rolled Q235 plate forming, connection weld must level off is smooth, the whole root weld convex part of the rod body and the error of leveling rod body should be no greater than + / - 1 mm. Welding after coloring flaw detection of GB/T3323 - international 19日

1。 Solar energy lamp generally composed of high-quality Q235 plate rolling. Connection weld must smooth level off. The rod body between the convex part of the weld and the lever body leveling error must not exceed 1 millimeter. Color, after the completion of welding flaw detection in accordance with international welding standard GB/T3323 - The requirements of 1989111. The lamp socket connector with nail and top silk. 2. Solar light pole surface should be anti-corrosion treatment - Hot dip galvanized + surface spraying. The galvanized layer surface should be smooth and beautiful, luster. No wrinkles, sagging, plus or minus surface zinc nodules, peeling, blemishes and imperfections. The thickness of the galvanized layer reaches more than 85 um. The zinc coating adhesion should comply with GB2694 - 98. Solar light pole surface spraying all outdoor weather resistance materials such as polyester plastic powder, 100 um thickness, adhesion to GB9286 - 880, hardness 2 h or more. 。 3. Solar lighting technology and acceptance standard execution according to the national standards. Design coefficient is 1. 8. Light pole design life of more than 20 years. 4. The design of solar energy lamp should facilitate wires through and connect. Hand hole should be on the back of the door the door of the intelligent traffic lights manufacturers. Lever door must level off is smooth, and the leveling error is not more than + / - 1 mm, the same lamp lever door and door has good compatibility, satisfies the requirement of security rainproof. Partial reinforcement bar the door after cut off, the strength of the basic in the whole bar. Attachment: solar lighting design and production of 1, GB2694 - related national standards 2, GB10854-88 hot dip galvanized galvanized body quality 89 steel structure welding size 3. GB77- 88 carbon structural steel. GB1591 - With 5 93 low combined with structural steel technology. GB2519- 88 hot-rolled strip steel, including strip steel varieties, DL/T646-6 7 98 transmission line steel rod manufacturing technology conditions. AASHT01994 light pole, mast, traffic signal pole