Square lift high solar home light daily use hot water

Light, as the high cost of the lamp, its update replacement is not so easily, not broken directly buy a new one to replace it, but in the range can be used for many times maintenance used again. Light, daily maintenance, therefore, is of vital importance, not only can avoid the



high lamp 【 Light, generally refers to more than 15 meters steel conical light pole and high-power modular fixtures are composed of new type of lighting. 】 As the high cost of the lamp, its update replacement is not so easily, not broken directly buy a new one to replace it, but in the range can be used for many times maintenance used again. Therefore, high lamp maintenance is vital, not only can avoid excessive degree of damage, and can prolong the service life of light. Should be pay attention to its safety, shall be regularly maintained, let's look at the square simple lift high lamp daily regular maintenance need to be aware of ten aspects:

square lift high lamp ten aspects need pay attention to daily maintenance

1, check the mast lighting all the black metal artifacts ( Including light pole wall) The hot dip galvanized 【 Hot dip galvanized, 镀锌) Also called hot dipping zinc and hot galvanizing, is an effective way of metal corrosion, mainly used for metal structure industry facilities. 】 Corrosion situation, fastener locking measures is in accordance with the requirements.

2, check the vertical degree is high lighting ( Must be according to the rules of solar led street lamp (according to the requirement Based energy as the earth's resources increasingly poor, the investment cost of the surging, all kinds of safety and pollution hidden danger is everywhere, the solar energy as an 'inexhaustible, an inexhaustible' safety, environmental protection, new energy more and more attention. 】 Manufacturer of regular use theodolite measuring and testing) , bar is a bit of permissible error should be less than bar high 3 ‰. Light pole axis straightness error' Beating straightness error is refers to each point on the straight line or the degree of deviation from the straight line. 】 Shall not be greater than the rod length of 2 ‰.

3, check the lamp panel mechanical strength, ensure the safety of the lamp panel, for enclosed lamp panel should check the cooling condition of it.

4, check whether there is light pole outside surface and weld corrosion situation, to experience a long standing but cannot to change again, when necessary by ultrasonic and magnetic particle inspection' Using the workpiece defect magnetic powder flaw detection of leakage magnetic field and the interaction of magnetic powder, it USES the steel surface and near surface defects ( Such as cracks, slag inclusion, hair lines, etc. ) Permeability and steel permeability difference, these materials after magnetization of the magnetic field discontinuity distortion will occur, forming part of the magnetic flux leak occurs on the surface of workpiece leakage magnetic field, so as to attract the magnetic powder form of defect magnetic powder - — Magnetic mark, under the condition of appropriate lighting, showing defects location and shape, observation and interpretation on the accumulation of these magnetic powder and magnetic powder flaw detection is realized. 】 Such as test method to test the weld and test.

5, check the bracket of lamps and lanterns of fastening bolts, the reasonable adjustment of lamps and lanterns of the projection direction;