Complimentary Samples for you and Technical Consultation at your convenience
Latest products
Solar street light project how to safely under contract to install Ed lights
by：ALLTOP
2021-02-01
Transparent cover retaining ring should be full of good, prevent drop hood reliability hook.
Solar led street lamps and lanterns should be solid, reject the loose, askew phenomenon.
Enamel lampshade corrosion, deformation should be replaced.
Transparent cover retaining ring should be full of good, can be applied to prevent off mask
transparent cover retaining ring should be complete and easy to use, in order to prevent the LIDS off on hook and reliably.
solar led street light should be strong, upright, shall not be loose or skewed.
enamel lampshade rust, deformation should be replaced.
transparent cover retaining ring should be complete and easy to use, in order to prevent the LIDS off on hook and reliably.
solar led street lamp reflector failure, should be replaced.
solar led street light reflectors is allowed to damage or deformation in the process of transportation and installation. Chimney should add rubber ring to polish. When the light open fracture and exposed in copper, should be replaced.
maintenance, a transparent bubble of lamp body and reflectors should be clean, wipe clean, cannot live cleaning should be replaced.
solar street lamp, the lamp body cannot bend, each part of add spring line tighten the clamping screw and refuse to loose.
cast iron lamp holder have crack, fall off a cannot use, no rubber is not qualified.
dustproof felt strip should complete solar street lamps, irregular should be replaced to repair.
light blocks and tube flange must match the crack and scars, screw must be complete, the length of the bolt should be able to through the light piece of flange.
closed the lamp holder of lamps and lanterns should be lead by the heat-resistant insulating tube ( Asbestos pipe or porcelain tube) Protection.
when the solar street light is suitable for different specifications of the bulb, lamp mouth protection should be adjusted to the same position and bulb capacity, in order to obtain the best light distribution curve.
transparent cover retaining ring should be complete and easy to use, in order to prevent the LIDS off on hook and reliably.
solar led street light should be strong, upright, shall not be loose or skewed.
enamel lampshade rust, deformation should be replaced.
transparent cover retaining ring should be complete and easy to use, in order to prevent the LIDS off on hook and reliably.
solar led street lamp reflector failure, should be replaced.
solar led street light reflectors is allowed to damage or deformation in the process of transportation and installation. Chimney should add rubber ring to polish. When the light open fracture and exposed in copper, should be replaced.
maintenance, a transparent bubble of lamp body and reflectors should be clean, wipe clean, cannot live cleaning should be replaced.
solar street lamp, the lamp body cannot bend, each part of add spring line tighten the clamping screw and refuse to loose.
cast iron lamp holder have crack, fall off a cannot use, no rubber is not qualified.
dustproof felt strip should complete solar street lamps, irregular should be replaced to repair.
light blocks and tube flange must match the crack and scars, screw must be complete, the length of the bolt should be able to through the light piece of flange.
closed the lamp holder of lamps and lanterns should be lead by the heat-resistant insulating tube ( Asbestos pipe or porcelain tube) Protection.
when the solar street light is suitable for different specifications of the bulb, lamp mouth protection should be adjusted to the same position and bulb capacity, in order to obtain the best light distribution curve.
Custom message
